Aqp moda Main
About the Aqp moda Main PCB
Aqp moda Main is an open source ESP32 PCB design by aquarius-plus, published on GitHub under the MIT license. It is a 4-layer board measuring 141 × 89.5 mm, with 92 components from 54 distinct parts.
Its main chip is the C7484, from the ESP32 family. Other key parts include the C455086, C2828044, C155612 and C15298. By type, the board carries 44 capacitors, 26 resistors, 6 ICs, 6 connectors, 4 jumpers and 3 inductors.
From the project
Development on Aquarius+ PCBs
Main components on the Aqp moda Main
Aqp moda Main bill of materials (BOM)
92 components, 54 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C455086 IP4234CZ6 | SC-74-6_1.55x2.9mm_P0.95mm | U1 |
| 1 | C7484 ESP32-S3-WROOM-1-N4R2 | ESP32-S2-SOLO-N4R2 | U2 |
| 1 | C2828044 LDL1117S33R | SOT-223-3_TabPin2 | U3 |
| 1 | C155612 LD1117S12 | SOT-223-3_TabPin2 | U4 |
| 1 | C15298 XC6SLX9-2TQG144C | TQFP-144_20x20mm_P0.5mm | U5 |
| 1 | C7484 IS61C5128AL-10TLI | TSOP-II-44_10.16x18.41mm_P0.8mm | U6 |
| 1 | C2901565 SX3M14.31818M20F30TNN | Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm | X1 |
| 1 | C132563 Power in | AMPHENOL_10118194-0001LF | J1 |
| 1 | C2798029 ESP USB Host | USB_A_Molex_67643_Horizontal | J2 |
| 1 | C2939180 Audio out | C2939180 | J3 |
| 1 | C138387 VGA | ICD15S13E4GV00LF | J4 |
| 1 | C693842 MEC5-030-01-X-RA-W1-XX-EDGE | SAMTEC_MEC5-030-01-X-RA-W1-XX-EDGE | J9 |
| 1 | C305940 Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J12 |
| 2 | C5116481 Pin Header | PinHeader_1x02_P2.54mm_Vertical | JP1, JP2 |
| 1 | Bootloader | PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 1 | C5116481 vZ80 Enabled | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP5 |
| 1 | C3664594 SW_DPDT_x2 | SW_E-Switch_EG2219_DPDT_Angled | SW1 |
| 1 | C2128 LED | LED_0805_2012Metric | D1 |
| 2 | C2661695 220 | L_0603_1608Metric | FB1, FB2 |
| 1 | C2649327 USB Choke | WE-CNSW_08058 | L1 |
Show 34 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C264047 10uF | C_0805_2012Metric | C3 |
| 2 | C15850 100nF | C_0603_1608Metric | C4, C6 |
| 1 | C14663 10uF | C_0805_2012Metric | C5 |
| 1 | C14663 100uF | CP_Elec_6.3x7.7 | C7 |
| 1 | C264047 100uF | CP_Elec_6.3x7.7 | C8 |
| 10 | C14663 4.7uF | C_0603_1608Metric | C9, C10, C18, C25, C29, C30, C32, C34 +2 |
| 7 | C19666 100nF | C_0603_1608Metric | C11, C17, C19, C23, C35, C36, C42 |
| 18 | C14663 100nF | C_0603_1608Metric | C12, C13, C14, C20, C21, C22, C24, C26 +10 |
| 2 | C19666 4.7uF | C_0603_1608Metric | C15, C16 |
| 1 | C14663 22uF | C_1206_3216Metric | C27 |
| 1 | C25804 0 | R_0603_1608Metric | R1 |
| 1 | C22775 0 | R_0603_1608Metric | R2 |
| 1 | C2784885 150 | R_0603_1608Metric | R3 |
| 1 | C2784885 330 | R_0603_1608Metric | R4 |
| 1 | C22808 150 | R_0603_1608Metric | R5 |
| 1 | C22808 330 | R_0603_1608Metric | R6 |
| 1 | C23138 536 | R_0603_1608Metric | R7 |
| 1 | C23138 1070 | R_0603_1608Metric | R8 |
| 1 | C23159 2150 | R_0603_1608Metric | R9 |
| 2 | C137783 4300 | R_0603_1608Metric | R10, R14 |
| 2 | C227956 536 | R_0603_1608Metric | R11, R15 |
| 1 | C170518 1070 | R_0603_1608Metric | R12 |
| 1 | C170518 2150 | R_0603_1608Metric | R13 |
| 1 | C23159 1070 | R_0603_1608Metric | R16 |
| 1 | C137783 2150 | R_0603_1608Metric | R17 |
| 1 | C227956 4300 | R_0603_1608Metric | R18 |
| 1 | C23159 820 | R_0603_1608Metric | R19 |
| 1 | C170518 820 | R_0603_1608Metric | R20 |
| 1 | C23253 0 | R_0603_1608Metric | R21 |
| 1 | C23253 220 | R_0603_1608Metric | R22 |
| 1 | C21190 10k | R_0603_1608Metric | R23 |
| 1 | C21190 100 | R_0603_1608Metric | R24 |
| 1 | C21190 0 | R_0603_1608Metric | R25 |
| 1 | C21190 220 | R_0603_1608Metric | R26 |
Aqp moda Main design files
The KiCad project lives in the aquarius-plus/aquarius-plus-pcbs repository on GitHub; these links point at the commit this page was built from.
Aqp moda Main: common questions
What microcontroller does the Aqp moda Main use?
The Aqp moda Main is built around the C7484, from the ESP32 family.
How big is the Aqp moda Main PCB?
The Aqp moda Main measures 141 × 89.5 mm, has 4 copper layers and is 1.67 mm thick.
How many components are on the Aqp moda Main?
92 components, from 54 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Aqp moda Main design files?
From the aquarius-plus/aquarius-plus-pcbs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Aqp moda Main design in my own project?
Yes, under the terms of its MIT license, which aquarius-plus chose for the repository.
Can I test firmware for the Aqp moda Main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in aquarius-plus-pcbs
ESP32Aquarius plus
167 × 115 mm210 parts2LMIT1
ESP32Aqp moda KBD
141 × 89.5 mm181 parts2LMIT1
ESP32Aqp moda Ports
141 × 89.5 mm181 parts2LMIT1
ESP32Aqp moda HC
141 × 89.5 mm181 parts2LMIT1
ESP32Aqp moda XBus
141 × 89.5 mm181 parts2LMIT1
Aqp moda Z80
84.4 × 69.8 mm21 parts4LMIT1
Aqp moda SD
51.9 × 44.4 mm15 parts2LMIT1
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k