HardLabs

Aquarius plus

aquarius-plus·aquarius-plus-pcbs·standard/rev1/aquarius-plus.kicad_pcb

Aquarius plus PCB layout, top view — open source ESP32 board by aquarius-plus
Simulate this board

About the Aquarius plus PCB

Aquarius plus is an open source ESP32 PCB design by aquarius-plus, published on GitHub under the MIT license. It is a 2-layer board measuring 167 × 115 mm, with 210 components from 57 distinct parts.

Its main chip is the ESP32-S2-SOLO-N4R2, from the ESP32 family. Other key parts include the XC3S200-4TQG144, SN74CBTD3861PWR, MAX3221ECPWR, Z84C0010AEG and 74HC166. By type, the board carries 101 resistors, 67 capacitors, 17 ICs, 14 connectors, 3 jumpers and 3 diodes.

From the project

Development on Aquarius+ PCBs

Main components on the Aquarius plus

XC3S200-4TQG144SN74CBTD3861PWRMAX3221ECPWRESP32-S2-SOLO-N4R2Z84C0010AEG74HC166IS61C5128AS-25QLI74LVC4245APWSST39SF020A-55-4C-WHELDL1117S33RMCP1700T-2502E/TTLD1117S12

Aquarius plus bill of materials (BOM)

210 components, 57 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XC3S200-4TQG144
U1
4
SN74CBTD3861PWR
U2, U4, U6, U8
1
MAX3221ECPWR
U3
1
ESP32-S2-SOLO-N4R2
U5
1
Z84C0010AEG
U7
2
74HC166
U9, U12
1
IS61C5128AS-25QLI
U10
2
74LVC4245APW
U11, U14
1
SST39SF020A-55-4C-WHE
U13
1
LDL1117S33R
U15
1
MCP1700T-2502E/TT
U16
1
LD1117S12
U17
2
BC847C
Q1, Q2
1
ECS-5032MV-143-CN-TR
X1
1
ECS-5032MV-480-BN-TR
X2
1
Cassette in
J1
1
Cassette out
J2
1
Amphenol GSD090012SEU
J3
1
Printer
J4
1
VGA
J6
Show 37 more
QtyPartRefs
1
DBG
J7
2
USB_A
J8, J9
1
Audio out
J10
1
ESP USB Host
J12
1
Power in
J13
1
FPGA spare
J14
1
Expansion port
J15
1
ESP32 spare
J16
1
Bootloader
JP1
2
USB
JP2, JP3
1
SW_DPDT_x2
SW1
2
1N4148WS
D1, D2
1
SD act.
D4
43
100nF
C1, C2, C3, C4, C6, C7, C8, C9 +35
17
4.7uF
C5, C10, C15, C20, C21, C22, C25, C26 +9
1
22uF
C37
4
100uF
C47, C53, C54, C61
2
10uF
C48, C49
26
4.7k
R1, R2, R5, R6, R8, R11, R14, R15 +18
5
220
R3, R4, R9, R29, R54
7
1k
R7, R47, R48, R49, R50, R51, R52
1
DNP
R10
7
10k
R12, R13, R16, R21, R22, R24, R27
22
100
R17, R18, R19, R20, R23, R55, R56, R57 +14
1
220k
R25
2
47k
R26, R31
1
2.2k
R30
3
536
R33, R37, R41
3
1070
R34, R38, R42
3
2150
R35, R39, R43
3
4300
R36, R40, R44
2
820
R45, R46
2
330
R71, R72
4
33
R73, R74, R75, R76
4
15k
R77, R78, R79, R80
2
150
R81, R82
3
1
R99, R100, R101

Aquarius plus design files

The KiCad project lives in the aquarius-plus/aquarius-plus-pcbs repository on GitHub; these links point at the commit this page was built from.

Aquarius plus: common questions

What microcontroller does the Aquarius plus use?

The Aquarius plus is built around the ESP32-S2-SOLO-N4R2, from the ESP32 family.

How big is the Aquarius plus PCB?

The Aquarius plus measures 167 × 115 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Aquarius plus?

210 components, from 57 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Aquarius plus design files?

From the aquarius-plus/aquarius-plus-pcbs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Aquarius plus design in my own project?

Yes, under the terms of its MIT license, which aquarius-plus chose for the repository.

Can I test firmware for the Aquarius plus without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in aquarius-plus-pcbs

Similar boards