Tars
arcadien·tars·hardware/kicad/tars4.kicad_sch

About the Tars PCB
Tars is an open source PCB design by arcadien, published on GitHub. It is a board, with 60 components from 47 distinct parts.
Other key parts include the TP4056 + DW01, R_PROG 2,4k, LOLIN S3 Mini, Screen 1 (left middle), Screen 2 (right middle) and MAX98357A (right middle). By type, the board carries 24 resistors, 12 capacitors, 11 ICs, 3 transistors, 2 connectors and 2 battery holders.
It belongs with the audio, sensors and iot & wireless designs in this gallery.
From the project
A desk-size replica of TARS from Interstellar: four independent columns like the film robot, joined by hollow pivots at the top, one LOLIN S3 Mini (ESP32-S3) driving two square 1.3" screens and a speaker, two 18650 cells in the legs. Model: OpenSCAD mechanical/scad/tars4.scad, fu
A desk-size replica of TARS from Interstellar: four independent columns like the film robot, joined by hollow pivots at the top, one LOLIN S3 Mini (ESP32-S3) driving two square 1.3" screens and a speaker, two 18650 cells in the legs. Model: OpenSCAD mechanical/scad/tars4.scad, fully parametric. Printed on an Ender 3.
Lying face down, lids off (part="open"): pivots and screens at the top of the image, cells at the bottom of the legs.
Main components on the Tars
Tars bill of materials (BOM)
60 components, 47 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 + DW01, R_PROG 2,4k | U1 | |
| 1 | LOLIN S3 Mini | U2 | |
| 1 | Screen 1 (left middle) | U3 | |
| 1 | Screen 2 (right middle) | U4 | |
| 1 | MAX98357A (right middle) | U5 | |
| 1 | INMP441 (left middle) | U6 | |
| 1 | DS3231 ZS-042 (right leg) | U7 | |
| 1 | ADXL345 GY-291 | U8 | |
| 1 | TPS63020 3,3 V | U9 | |
| 1 | AM312 | U10 | |
| 1 | BME280 (right leg) | U11 | |
| 2 | AO3401A | Q1, Q5 | |
| 1 | BC547B (carrier) | Q4 | |
| 1 | USB charging socket | J1 | |
| 1 | microSD (left leg) | J2 | |
| 1 | 18650 G | BT1 | |
| 1 | 18650 D | BT2 | |
| 2 | PPTC 1.6A | F1, F2 | |
| 1 | 39×22×10 8Ω | LS1 | |
| 1 | inter. ≥ 1 A | SW1 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1N5822 | D1 | |
| 1 | SMAJ5.0A (TVS) | D3 | |
| 1 | 220µ tant. CMS | C1 | |
| 1 | 10µ tant. (P1) | C2 | |
| 1 | 0.1µ (P1) | C3 | |
| 1 | 10µ tant. | C4 | |
| 1 | 0.1µ | C5 | |
| 2 | 0.1µ (S3) | C6, C8 | |
| 1 | 470µ 10V | C7 | |
| 1 | 22µ 16V | C9 | |
| 2 | 10µ tant. (P2) | C10, C12 | |
| 1 | 0.1µ (P2) | C11 | |
| 1 | 4.7k | R1 | |
| 1 | 1M (harness, B+ pad) | R2 | |
| 1 | 1M | R3 | |
| 1 | 10k (P1) | R4 | |
| 5 | 10k | R5, R6, R7, R8, R9 | |
| 2 | 1k (P2) | R10, R17 | |
| 3 | 33 | R11, R13, R14 | |
| 2 | 47 (carrier) | R12, R19 | |
| 1 | 68k | R15 | |
| 2 | 100k | R16, R22 | |
| 1 | 10k (P2) | R18 | |
| 1 | 33 (carrier) | R20 | |
| 1 | 100 (P2) | R21 | |
| 1 | 1M (harness, P4 end) | R23 | |
| 1 | 330k (carrier) | R24 |
Tars design files
The KiCad project lives in the arcadien/tars repository on GitHub; these links point at the commit this page was built from.
Tars: common questions
How many components are on the Tars?
60 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tars design files?
From the arcadien/tars repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Tars design in my own project?
The repository has no license, so all rights stay with arcadien. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k