12 open source boards using the AM312

Real designs built with the AM312, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the AM312

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the AM312 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 3 of 6 designs, most often 10 µF (then 2.2 µF).
VDDpin 1Connected to: 3.3V 67% · a signal 33%
  • Decoupling capacitor on 50% · 10 µF (1), 2.2 µF (1), 10 nF (1)
VSSpin 3Connected to: GND 100%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gamer Companion by donaldbell, SuperNicePCB by laemo10, PIR Movement sensor board by SolderedElectronics and PIR Movement sensor board with easyC by SolderedElectronics.

The AM312 in open source designs

The gallery holds 12 open source boards using the AM312 from 7 GitHub repositories; a typical one measures about 38 × 38 mm and carries around 17 components.

91% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.

The most starred is Tars by arcadien.

Parts used alongside the AM312

Microcontrollers on boards using the AM312

AM312: common questions

Where can I find a AM312 reference design?

Each of the 12 boards on this page is a real design using the AM312. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the AM312 VDD pin?

The VDD pin has a decoupling capacitor on 3 of 6 designs, most often 10 µF (then 2.2 µF). Counted from the KiCad layouts of 6 open source designs using the AM312.

Which microcontrollers do boards using the AM312 use?

Most are built on AVR/Arduino (6) and ESP32 (2).

How big is a typical board using the AM312?

The median is 38 × 38 mm, and 91% are two-layer designs.

What is the most popular open source board using the AM312?

By GitHub stars, Tars by arcadien, with 0 stars.

Can I simulate one of these boards using the AM312 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part