Hackpad
ArseniyCherednichenko·Hackpad·PCB/Hackpad.kicad_pcb
About the Hackpad PCB
Hackpad is an open source RP2040/RP2350 PCB design by ArseniyCherednichenko, published on GitHub. It is a 2-layer board measuring 67.2 × 84.7 mm, with 30 components from 6 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 18 diodes, 10 switches, 1 IC and 1 LED.
It belongs with the displays & leds designs in this gallery.
From the project
My Hackpad is a 3×3 macro keypad, which can be programmed to address all needs. It runs on a Seeed XIAO RP2040, and features Cherry MX mechanical switches, SK6812 RGB LEDs, a rotary encoder, and an OLED status display.
My Hackpad is a 3×3 macro keypad, which can be programmed to address all needs. It runs on a Seeed XIAO RP2040, and features Cherry MX mechanical switches, SK6812 RGB LEDs, a rotary encoder, and an OLED status display.
I wanted to have a custom keypad on my desk and use shortcuts assigned to each key to simplify and make my workflow more efficient.
To use Hackpad, order the PCB using gerbers.zip from JLCPCB, print the 3D enclosure, solder the components, install firmware and assemble everything. Edit main.py to customise your keymap.
Main components on the Hackpad
Hackpad bill of materials (BOM)
30 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 9 | SW_Push | MX-Hotswap-1U | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW10 |
| 1 | ~ | SSD1306-0.91-OLED-4pin-128x32 | OLED1 |
| 9 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 9 | SK6812MINI | MX_SK6812MINI-E_REV | D10, D11, D12, D13, D14, D15, D16, D17 +1 |
Hackpad design files
The KiCad project lives in the ArseniyCherednichenko/Hackpad repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Hackpad.kicad_pcb
- SchematicPCB/Hackpad.kicad_sch
- BOMBOM.csv
Hackpad: common questions
What microcontroller does the Hackpad use?
The Hackpad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the Hackpad PCB?
The Hackpad measures 67.2 × 84.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hackpad?
30 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hackpad design files?
From the ArseniyCherednichenko/Hackpad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hackpad design in my own project?
The repository has no license, so all rights stay with ArseniyCherednichenko. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hackpad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k