HardLabs

Carrier

ArsenShana·GPS-ES32·tracker-lab/public/downloads/carrier.kicad_pcb

Carrier PCB layout, top view — open source ESP32 board by ArsenShana

About the Carrier PCB

Carrier is an open source ESP32 PCB design by ArsenShana, published on GitHub. It is a 2-layer board measuring 100 × 78 mm, with 8 components from 8 distinct parts.

Its main chip is the ESP32_J2_1x19, from the ESP32 family. By type, the board carries 2 connectors, 2 capacitors, 1 jumper, 1 diode and 1 resistor.

It belongs with the rf & radio, iot & wireless and power & battery designs in this gallery.

From the project

Arduino

Оба проекта — PlatformIO (VS Code → расширение PlatformIO IDE).

В tracker-lab/ добавлены локальный сайт с интерактивной 3D-моделью, симуляция радиообмена, программно разведённая плата-носитель KiCad и корпус STL/STEP. Запуск сайта: cd tracker-lab → npm ci → npm start, затем открыть http://localhost:4173. Инструкция по сборке и прошивке: tracker-lab/README.html.

Carrier bill of materials (BOM)

8 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32_J2_1x19
J2
1
ESP32_J3_1x19
J3
1
E32_SOCKET_1x07_RIGHT_ANGLE
JE32
1
REMOVE_FOR_USB
JP1
1
LED_0805
D1
1
1000uF_10V
C1
1
100nF_0805
C2
1
330R_0805
R1

Carrier design files

The KiCad project lives in the ArsenShana/GPS-ES32 repository on GitHub; these links point at the commit this page was built from.

Carrier: common questions

What microcontroller does the Carrier use?

The Carrier is built around the ESP32_J2_1x19, from the ESP32 family.

How big is the Carrier PCB?

The Carrier measures 100 × 78 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Carrier?

8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Carrier design files?

From the ArsenShana/GPS-ES32 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Carrier design in my own project?

The repository has no license, so all rights stay with ArsenShana. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Carrier without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in GPS-ES32

Similar boards