Receiver
Arshsingh1602·Smart-Irrigation-System·Receiver(PCB)/Receiver.kicad_pcb
About the Receiver PCB
Receiver is an open source ESP32 PCB design by Arshsingh1602, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 100 mm, with 26 components from 16 distinct parts.
Its main chip is the ESP32-WROVER-E-N4R8, from the ESP32 family. Other key parts include the LM2596S-3.3, CP2102N-Axx-xQFN24 and SX1278. By type, the board carries 13 capacitors, 4 ICs, 4 resistors, 3 connectors and 2 transistors.
It belongs with the rf & radio, iot & wireless and sensors designs in this gallery.
From the project
This is our project of SIH 2024 in which we developed a smart irrigation system that can be used to control the under and overuse of water in the feild of farmer. This is a transmitter and receiver code that uses LoRa technology to communicate and uses firebase as a cloud and to store the data. This is only the hardware coding of it.
This project is a transmitter-receiver duo using the LoRa communication protocol that helps us to revolutionize the agriculture industry by advancing the Smart Irrigation System. The transmitter acts as the node that transmits the data, and the receiver acts as the central node to receive that data and communicate it further, and process it.
Features of the project include: 1. Soil Moisture Detection 2. Temperature and Humidity Detection 3. Transmission (Long Range(upto 12-15km in rural areas)) 4. External parameters fetching, calculations, and predictions based on ML models 5. Response to…
Main components on the Receiver
Receiver bill of materials (BOM)
26 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596S-3.3 | TO-263-5_TabPin3 | U1 |
| 1 | ESP32-WROVER-E-N4R8 | XCVR_ESP32-WROVER-E-N4R8 | U2 |
| 1 | CP2102N-Axx-xQFN24 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U3 |
| 1 | SX1278 | QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm | U5 |
| 2 | S8050 | TO-92_Inline | Q1, Q2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
| 1 | U.FL-R-SMT_01_ | HRS_U.FL-R-SMT_01_ | J5 |
| 4 | 0.1uF | C_0603_1608Metric | C1, C4, C6, C8 |
| 2 | 100uF | CP_Elec_3x5.3 | C2, C3 |
| 1 | 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 3 | 10uF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C7, C9, C10 |
| 1 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11 |
| 2 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13 |
| 2 | 10kR | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R2, R3 |
| 2 | 5.21kR | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R4, R5 |
Receiver design files
The KiCad project lives in the Arshsingh1602/Smart-Irrigation-System repository on GitHub; these links point at the commit this page was built from.
Receiver: common questions
What microcontroller does the Receiver use?
The Receiver is built around the ESP32-WROVER-E-N4R8, from the ESP32 family.
How big is the Receiver PCB?
The Receiver measures 65 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Receiver?
26 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Receiver design files?
From the Arshsingh1602/Smart-Irrigation-System repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Receiver design in my own project?
Yes, under the terms of its MIT license, which Arshsingh1602 chose for the repository.
Can I test firmware for the Receiver without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Smart-Irrigation-System
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k