Mini pdeck

arsovskiteodor·mini-pdeck·hardware/kicad/mini-pdeck.kicad_pcb

Mini pdeck PCB layout, top view — open source RP2040/RP2350 board by arsovskiteodor

About the Mini pdeck PCB

Mini pdeck is an open source RP2040/RP2350 PCB design by arsovskiteodor, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 69.8 × 69.1 mm, with 18 components from 6 distinct parts.

Its main chip is the RP2040-ZERO, from the RP2040/RP2350 family. By type, the board carries 6 resistors, 4 switches, 4 diodes and 1 IC.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

4-key, 2-encoder RP2040 macropad with a 0.96" OLED. Custom 2-layer PCB designed in KiCad, QMK firmware, built as a learning project from part selection to a working board

Created with KiCad 10 (draft schematic, 2026-10-30), named mini-pdeck: mini-pdeck.kicadpro, mini-pdeck.kicadsch and mini-pdeck.kicadpcb, directly in this folder. Keep them here: ${KIPRJMOD} (the project folder) is how the library table and the 3D model links find lib/`.

- Add the switch library as a submodule: git submodule add https://github.com/siderakb/key-switches.pretty hardware/kicad/lib/thirdparty/key-switches.pretty - Register libraries in Preferences → Manage Footprint Libraries → Project Specific Libraries with paths like ${KIPRJMOD}/lib/minipad.pretty. - Copy before you change. To…

Main components on the Mini pdeck

Mini pdeck bill of materials (BOM)

18 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040-ZERO
U1
1
OLED 0.96in SSD1306 I2C
DISP1
2
EC11 20 det.
ENC1, ENC2
4
KS-33 Red Silent
SW1, SW2, SW3, SW4
4
TBD
D1, D2, D3, D4
6
TBD
R1, R2, R3, R4, R5, R6

Mini pdeck design files

The KiCad project lives in the arsovskiteodor/mini-pdeck repository on GitHub; these links point at the commit this page was built from.

Mini pdeck: common questions

What microcontroller does the Mini pdeck use?

The Mini pdeck is built around the RP2040-ZERO, from the RP2040/RP2350 family.

How big is the Mini pdeck PCB?

The Mini pdeck measures 69.8 × 69.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mini pdeck?

18 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mini pdeck design files?

From the arsovskiteodor/mini-pdeck repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mini pdeck design in my own project?

Yes, under the terms of its CC-BY-4.0 license, which arsovskiteodor chose for the repository.

Can I test firmware for the Mini pdeck without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards