Vibration Sensor

ARTS-Laboratory·DOVE·system_design/Brooklyn/V0.5/Hardware/Circuit/main_board/Vibration_Sensor/Vibration_Sensor.kicad_pcb

Vibration Sensor PCB layout, top view — open source board by ARTS-Laboratory

Simulate this board

About the Vibration Sensor PCB

Vibration Sensor is an open source PCB design by ARTS-Laboratory, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 65 × 37.6 mm, with 15 components from 12 distinct parts.

Other key parts include the power_input and main_board_top_rail. By type, the board carries 3 capacitors, 2 ICs, 1 battery holder, 1 fuse, 1 diode and 1 resistor.

It belongs with the sensors designs in this gallery.

From the project

DOVE: Dynamics Observation and Vibration at the Edge. A deployable sensor package for vibration-based structural health monitoring.

Main components on the Vibration Sensor

power_input main_board_top_rail

Vibration Sensor bill of materials (BOM)

15 components, 12 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	power_input	XT60PW	U1
1	main_board_top_rail	top_rail	U5
1	Battery_Cell	battery_holder_10mm	BT1
1	DS3231M	SOIC-16W_7.5x10.3mm_P1.27mm	DS3231
1	Fuse	C_1206_3216Metric_Pad1.33x1.80mm_HandSolder	F1
1	microSD_small	small_microSD_v2	Micro_SD1
2	AP7361C-33E	SOT-223-3_TabPin2	VR3.3v, VR5v
1	nRF24L01+	nRF24L01+	nRF24L01
1	grounded_DIP_switch	grounded_switch	switch1
1	LED	LED_D3.0mm	D1
3	C	C_1206_3216Metric_Pad1.33x1.80mm_HandSolder	C1, C2, C3
1	R	R_1206_3216Metric_Pad1.30x1.75mm_HandSolder	R1

Vibration Sensor design files

The KiCad project lives in the ARTS-Laboratory/DOVE repository on GitHub; these links point at the commit this page was built from.

Vibration Sensor: common questions

How big is the Vibration Sensor PCB?

The Vibration Sensor measures 65 × 37.6 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Vibration Sensor?

15 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Vibration Sensor design files?

From the ARTS-Laboratory/DOVE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Vibration Sensor design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which ARTS-Laboratory chose for the repository.

More boards in DOVE

Similar boards