Basic-Buck-Converter
arturferdi·Basic-Buck-Converter·Basic_Buck_Converter/Basic_Buck_Converter.kicad_pcb
About the Basic-Buck-Converter PCB
Basic-Buck-Converter is an open source PCB design by arturferdi, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 54 × 28.5 mm, with 15 components from 12 distinct parts.
Other key parts include the NE555P. By type, the board carries 3 diodes, 3 capacitors, 3 resistors, 1 IC, 1 transistor and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
A Super Simple Buck Converter Design with NE555 as a PWM Generator. You can use this as your project, especially for you if you are a student from PENS. Because this is my old project at smt4. Contact me if you want to ask something.
Main components on the Basic-Buck-Converter
Basic-Buck-Converter bill of materials (BOM)
15 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | IRF3205 | TO-220-3_Vertical | Q1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | OUT1 |
| 1 | 20k | Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect_Type073_RT02602HBLU_1x02_P5.08mm_Horizontal | VCC1 |
| 3 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3 |
| 1 | L | L_Toroid_Vertical_L13.0mm_W6.5mm_P5.60mm | L1 |
| 1 | 1n | C_Rect_L7.0mm_W2.0mm_P5.00mm | C1 |
| 1 | 10n | C_Rect_L7.0mm_W2.0mm_P5.00mm | C2 |
| 1 | 100u | CP_Radial_D4.0mm_P2.00mm | C3 |
| 1 | 10k | R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R1 |
| 2 | 2k2 | R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R2, R3 |
Basic-Buck-Converter design files
The KiCad project lives in the arturferdi/Basic-Buck-Converter repository on GitHub; these links point at the commit this page was built from.
Basic-Buck-Converter: common questions
How big is the Basic-Buck-Converter PCB?
The Basic-Buck-Converter measures 54 × 28.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Basic-Buck-Converter?
15 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Basic-Buck-Converter design files?
From the arturferdi/Basic-Buck-Converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Basic-Buck-Converter design in my own project?
Yes, under the terms of its GPL-3.0 license, which arturferdi chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k