VentSense Stage2

Aryan-swag·VentSense·kicad/VentSense_Stage2/VentSense_Stage2.kicad_pcb

VentSense Stage2 PCB layout, top view — open source ESP32 board by Aryan-swag

About the VentSense Stage2 PCB

VentSense Stage2 is an open source ESP32 PCB design by Aryan-swag, published on GitHub. It is a 2-layer board measuring 124 × 112 mm, with 93 components from 53 distinct parts.

Its main chip is the ESP32-DevKitC-32E, from the ESP32 family. Other key parts include the TC4427 (DIP-8), ADS1115 #1 0x48 (CO), ADS1115 #2 0x49 (H2), ADS1115 #3 0x4B (cells) and MQ-7 seg 1. By type, the board carries 48 resistors, 24 ICs, 12 diodes, 5 capacitors, 2 switches and 1 transistor.

It belongs with the power & battery and sensors designs in this gallery.

From the project

VentSense: 2-of-3 gas/temperature/voltage early warning and per-cell isolation for small Li-ion packs. Vishwakarma Awards 2026-27 Stage 2 (VK26-IITH-SE-0279)

Main components on the VentSense Stage2

TC4427 (DIP-8)ADS1115 #1 0x48 (CO)ADS1115 #2 0x49 (H2)ADS1115 #3 0x4B (cells)MQ-7 seg 1MQ-7 seg 2MQ-7 seg 3MQ-7 seg 4MQ-8 seg 1MQ-8 seg 2MQ-8 seg 3MQ-8 seg 4DS18B20 cell 1DS18B20 cell 2DS18B20 cell 3DS18B20 cell 4ESP32-DevKitC-32EOLED 0x3CDS3231 RTC 0x68BME280 0x76PCF8574 #1 0x20PCF8574 #2 0x21microSDMAX6675

VentSense Stage2 bill of materials (BOM)

93 components, 53 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TC4427 (DIP-8)
U1
1
ADS1115 #1 0x48 (CO)
U4
1
ADS1115 #2 0x49 (H2)
U5
1
ADS1115 #3 0x4B (cells)
U6
1
MQ-7 seg 1
U7
1
MQ-7 seg 2
U8
1
MQ-7 seg 3
U9
1
MQ-7 seg 4
U10
1
MQ-8 seg 1
U11
1
MQ-8 seg 2
U12
1
MQ-8 seg 3
U13
1
MQ-8 seg 4
U14
1
DS18B20 cell 1
U15
1
DS18B20 cell 2
U16
1
DS18B20 cell 3
U17
1
DS18B20 cell 4
U18
1
ESP32-DevKitC-32E
U19
1
OLED 0x3C
U20
1
DS3231 RTC 0x68
U21
1
BME280 0x76
U22
Show 33 more
QtyPartRefs
1
PCF8574 #1 0x20
U23
1
PCF8574 #2 0x21
U24
1
microSD
U25
1
MAX6675
U26
1
BC547
Q4
1
5V active buzzer
BZ1
1
Acknowledge
SW1
1
Reset
SW2
1
Seg 1 Red
D2
1
Seg 1 Yellow
D3
1
Seg 1 Green
D4
1
Seg 2 Yellow
D5
1
Seg 2 Red
D6
1
Seg 2 Green
D7
1
Seg 3 Red
D8
1
Seg 3 Yellow
D9
1
Seg 3 Green
D10
1
Seg 4 Red
D11
1
Seg 4 Yellow
D12
1
Seg 4 Green
D13
1
1uF
C3
4
100nF
C7, C8, C9, C10
4
100k
R2, R3, R6, R7
2
10
R4, R5
4
100k 1%
R9, R12, R14, R16
4
20k 1%
R10, R11, R13, R15
8
15k
R17, R19, R21, R23, R25, R27, R29, R31
8
22k
R18, R20, R22, R24, R26, R28, R30, R32
1
4.7 kΩ
R33
2
4.7k
R34, R35
12
330
R36, R37, R38, R39, R40, R41, R42, R43 +4
1
1k
R48
2
10k
R49, R50

VentSense Stage2 design files

The KiCad project lives in the Aryan-swag/VentSense repository on GitHub; these links point at the commit this page was built from.

VentSense Stage2: common questions

What microcontroller does the VentSense Stage2 use?

The VentSense Stage2 is built around the ESP32-DevKitC-32E, from the ESP32 family.

How big is the VentSense Stage2 PCB?

The VentSense Stage2 measures 124 × 112 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the VentSense Stage2?

93 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the VentSense Stage2 design files?

From the Aryan-swag/VentSense repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the VentSense Stage2 design in my own project?

The repository has no license, so all rights stay with Aryan-swag. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the VentSense Stage2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in VentSense

Similar boards