32 open source boards using the ESP32-DEVKITC-32E
Real designs built with the ESP32-DEVKITC-32E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Server Motherboard
DDeGonge
48.8 × 50.5 mm108 parts2LMIT40ESP32
Smart soja
virgile-tchidehou
219.6 × 144.8 mm77 parts2LMIT1ESP32
Updated LOAF
OSHE-Github
393.7 × 165.1 mm64 parts2LNo license1ESP32
RCM-Hardware-V4
RCMgames
50.8 × 76.2 mm29 parts2LMIT1ESP32
LTC6811 ESP32 V3
tetra-aero
320 × 55 mm575 parts2LGPL-3.00ESP32
FPGA-I2S-IIR-Filter implementation
SFMonsun
142 × 166.9 mm257 parts2LNo license0ESP32
Bigthemio
techandpeople180.1 × 102.5 mm117 parts4LGPL-3.00ESP32
Fiberboard
nguyenduchan
118 × 84 mm116 parts2LNo license0ESP32
VentSense Stage2
Aryan-swag
124 × 112 mm93 parts2LNo license0ESP32
Multicopter
remmaTech12
60 × 60 mm61 parts2LNo license0ESP32
D03-MAIN-CTRL
byhabibi
160 × 115 mm59 parts2LNo license0ESP32
PV-Monitoring-System
JAJV02002
100 × 70 mm57 parts2LCC-BY-4.00ESP32
Control Board V2.1
AnotherBuildCorner
93 × 67.5 mm42 parts2LNo license0ESP32
Posture
zeyad-hisham-cyper
98.2 × 64.7 mm27 parts2LNo license0ESP32
Esp md3 servo3 sensor3
NiiRoboKen
75.7 × 69.3 mm23 parts2LNo license0ESP32
ESP
nyankowan
48 × 65.9 mm18 parts2LNo license0ESP32
VoltWatch
hridhayesh09
72 × 53 mm7 parts2LNo license0ESP32
Alarm clock
Magicman5284
93.5 × 61 mm6 parts2LNo license0ESP32
FlightDeck
MrDiamondDog
63.3 × 35.6 mm4 parts2LNo license0- schematic only · 21 partsESP32
Fear-Greed-Index-Tracker
Ajakovski
21 partsMIT0 - schematic only · 14 partsESP32
Power Monitor
Filips-Talums
14 parts2LNo license1 ESP32
LTC6811 ESP32 Master V6P1
tetra-aero
200 × 55 mm323 parts2LGPL-3.00ESP32
VentSense Stage2 Routed
Aryan-swag
124 × 112 mm93 parts2LNo license0ESP32
Multicopter2
remmaTech12
60 × 60 mm48 parts2LNo license0ESP32
Themio
techandpeople75.4 × 79 mm35 parts4LGPL-3.00ESP32
Controller
zuhayrl
55 × 70 mm22 parts2LNo license0ESP32
Cow
zeyad-hisham-cyper
81.4 × 59.8 mm19 parts2LNo license0ESP32
Car alarm
zeyad-hisham-cyper
100 × 60 mm17 parts2LNo license0ESP32
Gateway esp32
forg3
62 × 36 mm4 parts2LNo license0ESP32
ESP32 Master V2
tetra-aero
105 × 90 mm99 parts2LGPL-3.00ESP32
YAMADAmain veresp32
boiled-mackerel
77 × 67 mm36 parts2LNo license0ESP32
Coms Board V2
AnotherBuildCorner
48.9 × 68.6 mm6 parts2LNo license0
How designs wire the ESP32-DEVKITC-32E
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the ESP32-DEVKITC-32E connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin is left unconnected on 12 of 14 designs (a signal on 2).
- The SD2 pin is left unconnected on 12 of 14 designs (a signal on 2).
- The SD3 pin is left unconnected on 12 of 14 designs (a signal on 2).
- The CMD pin is left unconnected on 12 of 14 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ENpin J2_2 | Connected to: Not connected 86% | — |
| SENSOR_VPpin J2_3 | Connected to: Not connected 64% · a signal 36% | — |
| SENSOR_VNpin J2_4 | Connected to: Not connected 64% · a signal 36% | — |
| GND_J2_14pin J2_14 | Connected to: GND 86% | — |
| SD2pin J2_16 | Connected to: Not connected 86% | — |
| SD3pin J2_17 | Connected to: Not connected 86% | — |
| CMDpin J2_18 | Connected to: Not connected 86% | — |
| EXT_5Vpin J2_19 | Connected to: 5V 71% · a signal 21% | — |
| GND_J3_1pin J3_1 | Connected to: GND 86% | — |
| TXD0pin J3_4 | Connected to: Not connected 64% · a signal 36% | — |
| RXD0pin J3_5 | Connected to: Not connected 64% · a signal 36% | — |
| GND_J3_7pin J3_7 | Connected to: GND 64% · not connected 29% | — |
| IO0pin J3_14 | Connected to: Not connected 64% · a signal 36% | — |
| IO15pin J3_16 | Connected to: Not connected 64% · a signal 36% | — |
| SD1pin J3_17 | Connected to: Not connected 86% | — |
| SD0pin J3_18 | Connected to: Not connected 86% | — |
| CLKpin J3_19 | Connected to: Not connected 86% | — |
21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Server Motherboard by DDeGonge, Updated LOAF by OSHE-Github, RCM-Hardware-V4 by RCMgames and Smart soja by virgile-tchidehou.
The ESP32-DEVKITC-32E in open source designs
The gallery holds 32 open source boards using the ESP32-DEVKITC-32E from 24 GitHub repositories; a typical one measures about 93.3 × 68 mm and carries around 39 components.
94% are two-layer designs, the rest use four layers or more, and 31% carry an open source license.
The most starred is Server Motherboard by DDeGonge.
Parts used alongside the ESP32-DEVKITC-32E
Microcontrollers on boards using the ESP32-DEVKITC-32E
What boards using the ESP32-DEVKITC-32E are built for
ESP32-DEVKITC-32E: common questions
Where can I find a ESP32-DEVKITC-32E reference design?
Each of the 32 boards on this page is a real design using the ESP32-DEVKITC-32E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ESP32-DEVKITC-32E EN pin connected?
The EN pin is left unconnected on 12 of 14 designs (a signal on 2). Counted from the KiCad layouts of 22 open source designs using the ESP32-DEVKITC-32E.
How is the ESP32-DEVKITC-32E SD2 pin connected?
The SD2 pin is left unconnected on 12 of 14 designs (a signal on 2). Counted from the KiCad layouts of 22 open source designs using the ESP32-DEVKITC-32E.
How is the ESP32-DEVKITC-32E SD3 pin connected?
The SD3 pin is left unconnected on 12 of 14 designs (a signal on 2). Counted from the KiCad layouts of 22 open source designs using the ESP32-DEVKITC-32E.
Which microcontrollers do boards using the ESP32-DEVKITC-32E use?
Most are built on ESP32 (32).
How big is a typical board using the ESP32-DEVKITC-32E?
The median is 93.3 × 68 mm, and 94% are two-layer designs.
What is the most popular open source board using the ESP32-DEVKITC-32E?
By GitHub stars, Server Motherboard by DDeGonge, with 40 stars.
Can I simulate one of these boards using the ESP32-DEVKITC-32E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.