Certamenbuzzersv2
asadpetwalker·certamenbuzzersv2·CertamenBuzzersV2/CertamenBuzzersV2.kicad_pcb
About the Certamenbuzzersv2 PCB
Certamenbuzzersv2 is an open source ESP32 PCB design by asadpetwalker, published on GitHub under the MIT license. It is a 2-layer board measuring 89.5 × 77.4 mm, with 49 components from 25 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the NCP1117-3.3_SOT223 and TVS1400DRV. By type, the board carries 20 resistors, 13 connectors, 6 switches, 4 capacitors, 3 ICs and 2 buzzers.
From the project
A buzzer system for the game Certamen about Roman language, mythology, history, and culture. It is a quiz bowl style game, where whoever buzzes first gets a chance to claim the points.
A buzzer system for the game Certamen about Roman language, mythology, history, and culture. It is a quiz bowl style game, where whoever buzzes first gets a chance to claim the points.
I made this because right now buzzer systems are inaccessible. Buzzer systems are sold by JCL, but they have a monopoly over it, so they mark up the prices incredibly even though the electronics are fairly simple, to 800 dollars. for the small version. I made this for my team, because they need a buzzer system to get practice in, since hyperbuzzing is an important strategy in more competitive leagues, as well…

Main components on the Certamenbuzzersv2
Certamenbuzzersv2 bill of materials (BOM)
49 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U2 |
| 1 | TVS1400DRV | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U3 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U4 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | B1 | RJ25_Wayconn_MJEA-660X1_Horizontal | J2 |
| 1 | A1 | RJ25_Wayconn_MJEA-660X1_Horizontal | J3 |
| 1 | C2 | RJ25_Wayconn_MJEA-660X1_Horizontal | J4 |
| 1 | B2 | RJ25_Wayconn_MJEA-660X1_Horizontal | J5 |
| 1 | A2 | RJ25_Wayconn_MJEA-660X1_Horizontal | J6 |
| 1 | A3 | RJ25_Wayconn_MJEA-660X1_Horizontal | J7 |
| 1 | B3 | RJ25_Wayconn_MJEA-660X1_Horizontal | J8 |
| 1 | C3 | RJ25_Wayconn_MJEA-660X1_Horizontal | J9 |
| 1 | C4 | RJ25_Wayconn_MJEA-660X1_Horizontal | J10 |
| 1 | B4 | RJ25_Wayconn_MJEA-660X1_Horizontal | J11 |
| 1 | A4 | RJ25_Wayconn_MJEA-660X1_Horizontal | J12 |
| 1 | C1 | RJ25_Wayconn_MJEA-660X1_Horizontal | J14 |
| 2 | Buzzer | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1, BZ2 |
| 1 | ~ | PinSocket_1x04_P2.54mm_Vertical | SSD1 |
| 1 | RST | SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | BRD | PinSocket_1x02_P2.54mm_Vertical | SW2 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | Score_{A} | PinSocket_1x02_P2.54mm_Vertical | SW4, SW5, SW6 |
| 1 | BOOT | SW_Push_1P1T_NO_CK_KMR2 | SW7 |
| 2 | 10u | C_0805_2012Metric | C1, C2 |
| 2 | 100n | C_0805_2012Metric | C10, C11 |
| 20 | 10k | R_0603_1608Metric | R1, R5, R6, R7, R8, R9, R10, R11 +12 |
Certamenbuzzersv2 design files
The KiCad project lives in the asadpetwalker/certamenbuzzersv2 repository on GitHub; these links point at the commit this page was built from.
Certamenbuzzersv2: common questions
What microcontroller does the Certamenbuzzersv2 use?
The Certamenbuzzersv2 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Certamenbuzzersv2 PCB?
The Certamenbuzzersv2 measures 89.5 × 77.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Certamenbuzzersv2?
49 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Certamenbuzzersv2 design files?
From the asadpetwalker/certamenbuzzersv2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Certamenbuzzersv2 design in my own project?
Yes, under the terms of its MIT license, which asadpetwalker chose for the repository.
Can I test firmware for the Certamenbuzzersv2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k