Clappy
ashar-mohd-rehman·Clappy·PCB/Clappy.kicad_pcb
About the Clappy PCB
Clappy is an open source RP2040/RP2350 PCB design by ashar-mohd-rehman, published on GitHub under the MIT license. It is a 2-layer board measuring 97 × 59 mm, with 19 components from 5 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 8 diodes, 1 IC, 1 switch and 1 LED.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
A 8 key macropad, With a volume control knob and a display
WHY I MADE THIS? I really like minecraft pvp, But switching to hotbar with scroll wheel is not very precise and loses time, The time lost is an advantage to your opponent, You can use the number row on your keyboard, But that is very hard for me to reach, while moving with WASD especially with very short hands
So I decided to make this macropad which will help me in minecraft pvp and moreover I am a massive cad user, using macropad to pan, tilt, rotate instead of shortcuts will help me save time
Main components on the Clappy
Clappy bill of materials (BOM)
19 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 8 | MX_SW_HS | SW_MX_HS_CPG151101S11_1u | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | OLED_128X64_1.3_I2C | LCD_OLED_128X64_1.3_I2C | DS1 |
| 8 | D | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 |
Clappy design files
The KiCad project lives in the ashar-mohd-rehman/Clappy repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Clappy.kicad_pcb
- SchematicPCB/Clappy.kicad_sch
Clappy: common questions
What microcontroller does the Clappy use?
The Clappy is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the Clappy PCB?
The Clappy measures 97 × 59 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Clappy?
19 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Clappy design files?
From the ashar-mohd-rehman/Clappy repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Clappy design in my own project?
Yes, under the terms of its MIT license, which ashar-mohd-rehman chose for the repository.
Can I test firmware for the Clappy without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k