TPS-Buck-Converter
ashishjoy19·TPS-Buck-Converter
About the TPS-Buck-Converter PCB
TPS-Buck-Converter is an open source PCB design by ashishjoy19, published on GitHub. It is a 2-layer board measuring 31.4 × 32.6 mm, with 14 components from 11 distinct parts.
Other key parts include the TPS54302. By type, the board carries 6 capacitors, 4 resistors, 2 connectors, 1 IC and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
Project: BuckConverter.kicadsch Designed with: KiCad 9.0 Last updated: June 2026 Status: Schematic complete — PCB pending
Project: BuckConverter.kicadsch Designed with: KiCad 9.0 Last updated: June 2026 Status: Schematic complete — PCB pending
This is a synchronous step-down (buck) converter designed to step down an input voltage of 18V–26V DC to a regulated 7V DC output at up to 500mA continuous load current. The 7V output is intended to feed an AMS1117-5V LDO linear regulator, which then provides a clean 5V rail to power an AVR128DB32 microcontroller and its associated peripherals (MAX485EN RS-485 transceiver, external clock oscillator, limit switch interface).
Main components on the TPS-Buck-Converter
TPS-Buck-Converter bill of materials (BOM)
14 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS54302 | SOT-23-6 | U1 |
| 2 | Screw_Terminal_01x02_P5mm | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J1, J2 |
| 1 | 68uH | CDRH104R | L1 |
| 1 | 10uF | C_1206 | C1 |
| 2 | 0.1uF | C_1206 | C2, C3 |
| 2 | 22uF | C_1206 | C4, C5 |
| 1 | 75pF | C_1206 | C6 |
| 1 | 100k | R_1206 | R2 |
| 1 | 13.3k | R_1206 | R3 |
| 1 | 910k | R_1206 | R4 |
| 1 | 75k | R_1206 | R5 |
TPS-Buck-Converter design files
The KiCad project lives in the ashishjoy19/TPS-Buck-Converter repository on GitHub; these links point at the commit this page was built from.
- LayoutBuck_Converter.kicad_pcb
- SchematicBuck_Converter.kicad_sch
TPS-Buck-Converter: common questions
How big is the TPS-Buck-Converter PCB?
The TPS-Buck-Converter measures 31.4 × 32.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TPS-Buck-Converter?
14 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the TPS-Buck-Converter design files?
From the ashishjoy19/TPS-Buck-Converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TPS-Buck-Converter design in my own project?
The repository has no license, so all rights stay with ashishjoy19. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k