60 open source boards using the TPS54302
Real designs built with the TPS54302, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
HPM6P41 BB
Alipay1
100 × 80.3 mm276 parts4LMIT14EX-MotorShield8874
DCC-EX
65.9 × 52.9 mm75 parts4LCERN-OHL-W-2.012Raspberry Pi
PiPtr
jmlzone
101.6 × 141.7 mm379 parts4LNo license8RP2040/RP2350
Opentrig
Dawson-HEP
162.2 × 100 mm408 parts4LEPL-2.06Gripper hat
nhnifong
65 × 30 mm52 parts4LNo license3- schematic only · 192 partsFPGA
NetStream-Caravel
adulu-bang
192 partsApache-2.03 FPGA
Link
Jeo0
499.5 × 326 mm548 parts6LNo license2ESP32
Line sensor
Potato-eater
154 × 154 mm75 parts2LNo license2STM32
Tripod-FOC
GoTouchGra55
58.2 × 53.1 mm126 parts4LMIT1AVR/Arduino
Car
le-flav-b
50 × 67 mm94 parts2LNo license1Power tx
redhotchili0909
124 × 119.9 mm91 parts2LNo license1ESP32
Nerf-ATG-Electronics
nico25112005
56 × 38 mm87 parts4LCC-BY-NC-4.01RP2040/RP2350
RDAT
Astrid-Delestine
455.2 × 254.8 mm505 parts4LMIT0Eurobot 2025 carte mere
Les-opossums
87 × 85 mm306 parts4LNo license0STM32
XYmatics-E64
XyrusB2010
191.3 × 97.8 mm277 parts2LNo license0STM32
RSC-LV3-SwitchSense
cyfinfaza
140 × 85 mm181 parts2LNo license0ESP32
Atlas carrier ctrl
md-sazzad-eee
130 × 100 mm145 parts4LNo license0ESP32
ELE MB A1
Les-opossums
80 × 56 mm131 parts4LNo license0STM32
Subaru brz hv ecu
outlandnish
100 × 82.6 mm123 parts4LMIT0STM32
RSC-LV3-LVBPS
cyfinfaza
210 × 60 mm118 parts2LNo license0RP2040/RP2350
MagicianCam4
magician-project
72 × 79 mm110 parts2LNo license0STM32
RSC-LV3-HVBPS
cyfinfaza
124 × 53 mm106 parts2LNo license0RP2040/RP2350
Mazzy
jaspermayone
116 × 93.5 mm100 parts2LNo license0ESP32
Fertilizer-Pump
Handkep
100 × 100 mm93 parts2LNo license0STM32
HoG
GoTouchGra55
60 × 60 mm92 parts6LMIT0STM32
Aero-Zero
ChladpavPy
65 × 40.8 mm92 parts4LNo license0ESP32
Stepper-Motor-Controller
Ricsi1231
42.3 × 42.3 mm86 parts6LMIT0STM32
Custom flight controller
Prateek-elec
36 × 36 mm82 parts4LMIT0ESP32
Hydroponics reservoir controller
bookofthefuture
100 × 100 mm76 parts2LNo license0ESP32
Air-Quality-Sensor
Szymon423
70 × 70 mm76 parts2LCC-BY-NC-4.00STM32
3-Axis-Gimbal
IsmaHaikal0910
28 × 40 mm73 parts4LNo license0RP2040/RP2350
Kicad carte lidar
Les-opossums
68 × 68 mm66 parts4LNo license0STM32
Digital-Humidity-Gauge
embeddedalpha
50 × 50 mm63 parts2LNo license0RP2040/RP2350
Combo lock breaker
ShaanJ1
50 × 58.9 mm55 parts4LNo license0ESP32
ESP32
buttonbugs
35 × 35 mm39 parts2LMIT0STM32
Autonomous drone
jeffmc6767
36.7 × 35.2 mm34 parts4LNo license0
How designs wire the TPS54302
Read from the KiCad layouts of 47 open source designs, one per repository: what each pin of the TPS54302 connects to, and the resistors, capacitors and other passives placed on it.
- The SW pin has a series capacitor on 42 of 47 designs, most often 100 nF.
- The SW pin has a inductor on 42 of 47 designs, most often 10 µH (then 4.7 µH).
- The BOOT pin has a series capacitor on 42 of 45 designs, most often 100 nF.
- The FB pin has a resistor to GND on 37 of 45 designs, most often 13.3 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 94% | — |
| SWpin 2 | Connected to: Signal 94% |
|
| VINpin 3 | Connected to: 12V 84% |
|
| FBpin 4 | Connected to: Signal 100% |
|
| ENpin 5 | Connected to: Signal 46% · not connected 40% |
|
| BOOTpin 6 | Connected to: Signal 98% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RS64c PS by lhm0, Shu BEC by T3nk4I, Corevus toolboard by calithameridi and HPM6P41 BB by Alipay1.
The TPS54302 in open source designs
The gallery holds 60 open source boards using the TPS54302 from 49 GitHub repositories; a typical one measures about 88 × 74 mm and carries around 88 components.
53% use four copper layers or more, and 30% carry an open source license.
The most starred is RS64c PS by lhm0.
Parts used alongside the TPS54302
Microcontrollers on boards using the TPS54302
What boards using the TPS54302 are built for
TPS54302: common questions
Where can I find a TPS54302 reference design?
Each of the 60 boards on this page is a real design using the TPS54302. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS54302 SW pin connected?
The SW pin has a series capacitor on 42 of 47 designs, most often 100 nF. Counted from the KiCad layouts of 47 open source designs using the TPS54302.
How is the TPS54302 BOOT pin connected?
The BOOT pin has a series capacitor on 42 of 45 designs, most often 100 nF. Counted from the KiCad layouts of 47 open source designs using the TPS54302.
What resistor goes on the TPS54302 FB pin?
The FB pin has a resistor to GND on 37 of 45 designs, most often 13.3 kΩ (then 10 kΩ). Counted from the KiCad layouts of 47 open source designs using the TPS54302.
What parts are used alongside the TPS54302?
The ESP32-S3-WROOM-1, USBLC6-2SC6, W25Q128JVS, RP2040 and SN65HVD230 appear in the most repositories here.
Which microcontrollers do boards using the TPS54302 use?
Most are built on STM32 (19), ESP32 (11), AVR/Arduino (7) and RP2040/RP2350 (6).
How big is a typical board using the TPS54302?
The median is 88 × 74 mm, and 47% are two-layer designs.
What is the most popular open source board using the TPS54302?
By GitHub stars, RS64c PS by lhm0, with 45 stars.
Can I simulate one of these boards using the TPS54302 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.