Heckpad
ashutoshpatraa·Heckpad·PCB/MacroPad.kicad_pcb
About the Heckpad PCB
Heckpad is an open source Microchip SAM PCB design by ashutoshpatraa, published on GitHub. It is a 2-layer board measuring 73.5 × 87 mm, with 21 components from 5 distinct parts.
Its main chip is the SeeeduinoXIAO, from the Microchip SAM family. By type, the board carries 10 switches, 9 diodes, 1 IC and 1 LED.
It belongs with the keyboards designs in this gallery.
From the project
My first hackpad design
A compact 3x3 macro keypad with a rotary encoder, SSD1306 OLED, and a 3D-printed enclosure. Built around the Seeeduino XIAO RP2040, it is intended for KMK firmware so you can tailor layers and behaviors with Python.

Main components on the Heckpad
Heckpad bill of materials (BOM)
21 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SeeeduinoXIAO | XIAO-SAMD21-DIP | U1 |
| 9 | SW_Push_45deg | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW10 |
| 1 | SSD1306 | 128x64OLED | Brd1 |
| 9 | D | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
Heckpad design files
The KiCad project lives in the ashutoshpatraa/Heckpad repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/MacroPad.kicad_pcb
- SchematicPCB/MacroPad.kicad_sch
Heckpad: common questions
What microcontroller does the Heckpad use?
The Heckpad is built around the SeeeduinoXIAO, from the Microchip SAM family.
How big is the Heckpad PCB?
The Heckpad measures 73.5 × 87 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Heckpad?
21 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Heckpad design files?
From the ashutoshpatraa/Heckpad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Heckpad design in my own project?
The repository has no license, so all rights stay with ashutoshpatraa. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Heckpad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416