61 open source boards using the SeeeduinoXIAO
Real designs built with the SeeeduinoXIAO, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Sample Numeric Keyboard
famichu
82 × 120 mm62 parts2LCC-BY-NC-4.0465Mongus48
ChrisChrisLoLo
228.6 × 100 mm111 parts2LGPL-3.0335Slice36
MReavley
118.8 × 97.2 mm46 parts2LMIT103Nordic nRF
Artsyfartsy
GroooveBob
103.4 × 58.3 mm18 parts2LMIT39Anavi handle
AnaviTechnology
35 × 33.3 mm2 parts2LNo license10KBPY
andywarburton
19.9 × 41.5 mm2 parts2LGPL-3.04NXP
Main Board
MUNAKATA-EPC
120 × 113.1 mm58 parts2LMIT3Pmod2rpi
fm4dd
65 × 56 mm36 parts2LCERN-OHL-1.23Tc69
sadaoikebe
307.2 × 115.5 mm98 parts2LMIT2Seeeduino xiao isp programmer
Beirdo
25.9 × 30.7 mm6 parts2LMIT2Touchscreen tester
dstahlke
38.1 × 33.7 mm5 parts2LMIT2The Macruwu 2.0
SirBramble
189 × 92.3 mm91 parts2LNo license1Solo Mini Controller
sullyjason
38 × 45.3 mm35 parts4LNo license1Macro Keyboard 3x3
ImSeanConroy
73.2 × 59.4 mm10 parts2LMIT1Mage
mosswg
144.8 × 143.8 mm79 parts2LMIT0Matosic macropad
matosichrvoje
73 × 91 mm44 parts2LCC-BY-SA-4.00HVGene-OpenHardware
Teille98
94.8 × 57.5 mm33 parts2LNo license0ESP32
Led zeppelin board
MiroKeimioniemi
96.5 × 63.5 mm28 parts2LCC-BY-NC-4.00Microchip SAM
Heckpad
ashutoshpatraa
73.5 × 87 mm21 parts2LNo license0RP2040/RP2350
Hikorobo
waiteu-git
77.5 × 52.1 mm8 parts2LNo license0Beyblock20
ChrisChrisLoLo
95.3 × 100 mm51 parts2LGPL-3.0335Arduino Tracking Antenna
UWARG
53.1 × 66.6 mm41 parts2LNo license59NXP
Heracles.main
MUNAKATA-EPC
100 × 86.1 mm41 parts2LMIT3RGB 2x2 with WS2811
sullyjason
41.9 × 59.7 mm27 parts2LNo license1Macro Keyboard 2x4
ImSeanConroy
92.2 × 40.1 mm9 parts2LMIT1Engel line board v2
MUNAKATA-EPC
209.9 × 170 mm99 parts2LNo license0EmotionTracker
sullyjason
32.9 × 33.4 mm28 parts2LNo license0Qtouch board
MiroKeimioniemi
139 × 74 mm25 parts2LCC-BY-NC-4.00Knoblin3
ChrisChrisLoLo
31.8 × 100 mm11 parts2LGPL-3.0335Bumwings v001R64 xiao sd
tubbytwins
344.6 × 141.3 mm131 parts2LMIT22XIAO Sharp LCD
bitbank2
40.1 × 31.7 mm11 parts2LApache-2.016NXP
Null seet
MUNAKATA-EPC
100 × 86.1 mm41 parts2LMIT3IR board syuuseibann
MUNAKATA-EPC
110 × 110 mm64 parts2LNo license1RP2040/RP2350
Puck
oist
63 × 62.9 mm24 parts2LApache-2.01Gopher jump sw
sat0ken
97.9 × 172.8 mm12 parts2LMIT1Macro Keyboard 1x4
ImSeanConroy
92.2 × 20.8 mm5 parts2LMIT1
How designs wire the SeeeduinoXIAO
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the SeeeduinoXIAO connects to, and the resistors, capacitors and other passives placed on it.
- The 3V3 pin is tied to 3.3V on 20 of 32 designs (not connected on 9, a signal on 2).
- The PA31_SWDIO pin is left unconnected on 16 of 16 designs.
- The PA30_SWCLK pin is left unconnected on 16 of 16 designs.
- The RESET pin is left unconnected on 15 of 15 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 12 | Connected to: 3.3V 63% · not connected 28% | — |
| PA31_SWDIOpin 17 | Connected to: Not connected 100% | — |
| PA30_SWCLKpin 18 | Connected to: Not connected 100% | — |
| RESETpin 19 | Connected to: Not connected 100% | — |
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sample Numeric Keyboard by famichu, Beyblock20 by ChrisChrisLoLo, Slice36 by MReavley and Arduino Tracking Antenna by UWARG.
The SeeeduinoXIAO in open source designs
The gallery holds 61 open source boards using the SeeeduinoXIAO from 32 GitHub repositories; a typical one measures about 94.8 × 88.9 mm and carries around 25 components.
98% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.
The most starred is Sample Numeric Keyboard by famichu.
Parts used alongside the SeeeduinoXIAO
Microcontrollers on boards using the SeeeduinoXIAO
What boards using the SeeeduinoXIAO are built for
SeeeduinoXIAO: common questions
Where can I find a SeeeduinoXIAO reference design?
Each of the 61 boards on this page is a real design using the SeeeduinoXIAO. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SeeeduinoXIAO 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 20 of 32 designs (not connected on 9, a signal on 2). Counted from the KiCad layouts of 32 open source designs using the SeeeduinoXIAO.
How is the SeeeduinoXIAO PA31_SWDIO pin connected?
The PA31_SWDIO pin is left unconnected on 16 of 16 designs. Counted from the KiCad layouts of 32 open source designs using the SeeeduinoXIAO.
How is the SeeeduinoXIAO PA30_SWCLK pin connected?
The PA30_SWCLK pin is left unconnected on 16 of 16 designs. Counted from the KiCad layouts of 32 open source designs using the SeeeduinoXIAO.
What parts are used alongside the SeeeduinoXIAO?
The 74HC595, CD74HC4067SM, Teensy4.0 and TSSP58038 appear in the most repositories here.
Which microcontrollers do boards using the SeeeduinoXIAO use?
Most are built on NXP (5), RP2040/RP2350 (2), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the SeeeduinoXIAO?
The median is 94.8 × 88.9 mm, and 98% are two-layer designs.
What is the most popular open source board using the SeeeduinoXIAO?
By GitHub stars, Sample Numeric Keyboard by famichu, with 465 stars.
Can I simulate one of these boards using the SeeeduinoXIAO before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.