Task2-Buck-Converter-LM2596
Assane401·Task2-Buck-Converter-LM2596
About the Task2-Buck-Converter-LM2596 PCB
Task2-Buck-Converter-LM2596 is an open source PCB design by Assane401, published on GitHub. It is a 2-layer board measuring 80 × 40 mm, with 8 components from 8 distinct parts.
Other key parts include the LM2596S-5. By type, the board carries 3 capacitors, 2 connectors, 1 IC, 1 diode and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
Buck Converter PCB 12V→5V — LM2596S-5.0
Design a compact PCB for stepping down 12V to 5V using the LM2596S-5.0 switching regulator.
- KiCad 9.0 — Schematic & PCB design - Git / GitHub — Version control
Main components on the Task2-Buck-Converter-LM2596
Task2-Buck-Converter-LM2596 bill of materials (BOM)
8 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596S-5 | TO-263-5_TabPin3 | U1 |
| 1 | +12 V | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | +5 V | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | 5A/ 40V | D_DO-201AD_P12.70mm_Horizontal | D1 |
| 1 | 33 µH/ 3.5A | L_Toroid_Horizontal_D9.5mm_P15.00mm_Diameter10-5mm_Amidon-T37 | L1 |
| 1 | 470 µF/ 50V | CP_Radial_D12.5mm_P5.00mm | C1 |
| 1 | 330 µF/ 35 V | CP_Radial_D12.5mm_P5.00mm | C2 |
| 1 | 100 nF | C_0805_2012Metric | C3 |
Task2-Buck-Converter-LM2596 design files
The KiCad project lives in the Assane401/Task2-Buck-Converter-LM2596 repository on GitHub; these links point at the commit this page was built from.
Task2-Buck-Converter-LM2596: common questions
How big is the Task2-Buck-Converter-LM2596 PCB?
The Task2-Buck-Converter-LM2596 measures 80 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Task2-Buck-Converter-LM2596?
8 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Task2-Buck-Converter-LM2596 design files?
From the Assane401/Task2-Buck-Converter-LM2596 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Task2-Buck-Converter-LM2596 design in my own project?
The repository has no license, so all rights stay with Assane401. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k