HardLabs

EV19-Dashboard

ASURacingTeam·EV19-Dashboard·hardware/ev19dashboardv1.kicad_pcb

EV19-Dashboard PCB layout, top view — open source STM32 board by ASURacingTeam

About the EV19-Dashboard PCB

EV19-Dashboard is an open source STM32 PCB design by ASURacingTeam, published on GitHub. It is a 2-layer board measuring 111.6 × 67.3 mm, with 41 components from 12 distinct parts.

Its main chip is the STM32F103CBTx, from the STM32 family. Other key parts include the AMS1117-3.3, lcd, AMS1117-5.0, SN65HVD232 and TLC5940PWP. By type, the board carries 16 diodes, 15 capacitors, 7 ICs, 2 resistors and 1 connector.

Main components on the EV19-Dashboard

AMS1117-3.3STM32F103CBTxlcdAMS1117-5.0SN65HVD232TLC5940PWP

EV19-Dashboard bill of materials (BOM)

41 components, 12 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32F103CBTx
U2
1
lcd
U3
2
AMS1117-5.0
U4, U6
1
SN65HVD232
U5
1
TLC5940PWP
U7
1
Conn_01x04
J2
16
LED_ALT
D1, D2, D3, D4, D5, D6, D7, D8 +8
7
10u
C1, C2, C8, C9, C10, C13, C14
8
100n
C3, C4, C5, C6, C7, C11, C12, C15
1
120
R1
1
R
R2

EV19-Dashboard design files

The KiCad project lives in the ASURacingTeam/EV19-Dashboard repository on GitHub; these links point at the commit this page was built from.

EV19-Dashboard: common questions

What microcontroller does the EV19-Dashboard use?

The EV19-Dashboard is built around the STM32F103CBTx, from the STM32 family.

How big is the EV19-Dashboard PCB?

The EV19-Dashboard measures 111.6 × 67.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EV19-Dashboard?

41 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the EV19-Dashboard design files?

From the ASURacingTeam/EV19-Dashboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the EV19-Dashboard design in my own project?

The repository has no license, so all rights stay with ASURacingTeam. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the EV19-Dashboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards