6 open source boards using the LCD
Real designs built with the LCD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350XSense
lithiumice
30.8 × 46.9 mm74 parts4LNo license92
NXPSafecast air teensy
Safecast
108 × 69.9 mm58 parts2LNo license7
Tester circut
yazidta
69.6 × 101.6 mm49 parts2LNo license3
STM32EV19-Dashboard
ASURacingTeam
111.6 × 67.3 mm41 parts2LNo license0
RP2040/RP2350Xterminal
33 × 33 mm67 parts2LNo license92
Ft03
schlae
40.9 × 23.7 mm62 parts4LNo license133
The LCD in open source designs
The gallery holds 6 open source boards using the LCD from 5 GitHub repositories; a typical one measures about 55.3 × 57.1 mm and carries around 60 components.
67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Ft03 by schlae.
Microcontrollers on boards using the LCD
What boards using the LCD are built for
LCD: common questions
Where can I find a LCD reference design?
Each of the 6 boards on this page is a real design using the LCD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LCD use?
Most are built on RP2040/RP2350 (2), NXP (1) and STM32 (1).
How big is a typical board using the LCD?
The median is 55.3 × 57.1 mm, and 67% are two-layer designs.
What is the most popular open source board using the LCD?
By GitHub stars, Ft03 by schlae, with 133 stars.
Can I simulate one of these boards using the LCD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.