Desk annunciator panel

atomicra1n·desk-annunciator-panel·pcb/annunciator.kicad_pcb

Desk annunciator panel PCB layout, top view — open source RP2040/RP2350 board by atomicra1n

About the Desk annunciator panel PCB

Desk annunciator panel is an open source RP2040/RP2350 PCB design by atomicra1n, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 62 components from 20 distinct parts.

Its main chip is the RPI Pico pins 1-20, from the RP2040/RP2350 family. Other key parts include the 74HC595. By type, the board carries 29 resistors, 13 diodes, 8 transistors, 3 connectors, 3 switches and 3 capacitors.

It belongs with the iot & wireless and science & space designs in this gallery.

From the project

A smaller version of alarm panels found in Main Control Rooms of Nuclear Power Plants. Has 12 backlit alarm tiles, a seven segment display (8 digits) and ACK, RESET and TEST buttons. It is controlled by a Raspberry Pi Pico WH and shows live radiation readings from my Wi-Fi Geiger

A smaller version of alarm panels found in Main Control Rooms of Nuclear Power Plants. Has 12 backlit alarm tiles, a seven segment display (8 digits) and ACK, RESET and TEST buttons. It is controlled by a Raspberry Pi Pico WH and shows live radiation readings from my Wi-Fi Geiger Counter which I made in Week 1 of Half Life. The alarm tiles light up when a problem occurs to notify me and play a sound.

Desk annunciator panel, from the project README
From the project README

Main components on the Desk annunciator panel

Desk annunciator panel bill of materials (BOM)

62 components, 20 distinct parts.

QtyPartRefs
2
74HC595
U1, U2
8
2N3904
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
1
RPI Pico pins 1-20
J1
1
RPI Pico pins 21-40
J2
1
Display IN
J3
1
KSSG3108
LS1
1
ACK
SW1
1
RESET
SW2
1
TEST
SW3
4
Red
D1, D2, D3, D4
4
Yellow
D5, D6, D7, D8
4
White
D9, D10, D11, D12
1
1N4148
D13
2
100n
C1, C2
1
47u
C3
9
10k
R1, R14, R15, R16, R17, R18, R19, R20 +1
4
270
R2, R3, R4, R5
8
330
R6, R7, R8, R9, R10, R11, R12, R13
7
1k
R22, R24, R25, R26, R27, R28, R29
1
47
R23

Desk annunciator panel design files

The KiCad project lives in the atomicra1n/desk-annunciator-panel repository on GitHub; these links point at the commit this page was built from.

Desk annunciator panel: common questions

What microcontroller does the Desk annunciator panel use?

The Desk annunciator panel is built around the RPI Pico pins 1-20, from the RP2040/RP2350 family.

How big is the Desk annunciator panel PCB?

The Desk annunciator panel measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Desk annunciator panel?

62 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Desk annunciator panel design files?

From the atomicra1n/desk-annunciator-panel repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Desk annunciator panel design in my own project?

The repository has no license, so all rights stay with atomicra1n. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Desk annunciator panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards