HardLabs

RP2040-BOARD

atulravi·picuno·RP2040/v2/kicad/v2.0/rp2040-basic-m1 - Copy.kicad_pcb

RP2040-BOARD layout, top view — open source RP2040/RP2350 board by atulravi
Simulate this board

About the RP2040-BOARD

RP2040-BOARD is an open source RP2040/RP2350 PCB design by atulravi, published on GitHub. It is a 2-layer board measuring 49.8 × 68.7 mm, with 40 components from 25 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the AZ1117CH-3.3TRG1 SOT223-3 and W25Q128JVS. By type, the board carries 15 capacitors, 9 connectors, 8 resistors, 3 ICs, 3 diodes and 1 crystal.

From the project

A repo of all files for the PicUNO Ecosystem of boards by ESCcrasci and AtrivaTECH

Main components on the RP2040-BOARD

RP2040AZ1117CH-3.3TRG1 SOT223-3W25Q128JVS

RP2040-BOARD bill of materials (BOM)

40 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
AZ1117CH-3.3TRG1 SOT223-3
U2
1
W25Q128JVS
U3
1
Crystal 12 Mhz
Y1
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J1
1
SM04B-SRSS-TB_LF__SN_
Conn_01x02_Pin
J2
1
Conn_01x10_Socket
J3
2
CONN_01X08_SOCKET
Conn_01x08_Socket
J4, J6
1
Conn_01x06_Pin
J5
1
Conn_01x06_Socket
J7
1
Conn_01x03_Pin
J8
1
Barrel_Jack_Switch
J9
1
TACT SW
SW2
1
D_Schottky
D1
1
WS2812B
D_Schottky
D2
1
D_TVS_Dual_AAC
D3
2
27P
27p
C1, C2
8
100N
100n
C3, C4, C6, C7, C8, C9, C10, C11
2
1u
C5, C12
2
10U
10u
C13, C14
Show 5 more
QtyPartRefs
1
100N
100n
C15
3
5.1K
R2, R3, R33
2
27R
R4, R5
2
1k
R6, R16
1
10K
10k
R7

RP2040-BOARD design files

The KiCad project lives in the atulravi/picuno repository on GitHub; these links point at the commit this page was built from.

RP2040-BOARD: common questions

What microcontroller does the RP2040-BOARD use?

The RP2040-BOARD is built around the RP2040, from the RP2040/RP2350 family.

How big is the RP2040-BOARD?

The RP2040-BOARD measures 49.8 × 68.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RP2040-BOARD?

40 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RP2040-BOARD design files?

From the atulravi/picuno repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the RP2040-BOARD design in my own project?

The repository has no license, so all rights stay with atulravi. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RP2040-BOARD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in picuno

Similar boards