HardLabs

CAN2Serial

AugustoS97·BMS-BatterySystem·Diseno-Electronico/CAN2Serial/CAN2Serial.kicad_pcb

CAN2Serial PCB layout, top view — open source AVR/Arduino board by AugustoS97
Simulate this board

About the CAN2Serial PCB

CAN2Serial is an open source AVR/Arduino PCB design by AugustoS97, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 67.3 × 52.1 mm, with 33 components from 30 distinct parts.

Its main chip is the ADG731, from the AVR/Arduino family. Other key parts include the MCP2515-XSO and TJA1050T. By type, the board carries 13 capacitors, 7 resistors, 6 connectors, 3 ICs, 2 crystals and 2 jumpers.

It belongs with the power & battery designs in this gallery.

From the project

Repositorio con el diseño de un BMS y una batería como TFM

In the present Master’s Degree Final Project, a Battery Management System (BMS) has been designed and manufactured, as well as a modular battery configurable at different voltages and capacities, with the aim of being able to power isolated electronic systems such as devices for capturing eco-acoustic significance indexes. The electronic design of the different modules that make up the power supply and management system has been carried out, as well as the calculation and design of the battery based on lithium-ion cells and its mechanical structure. In order to be able to supply this system…

CAN2Serial, from the project README
From the project README

Main components on the CAN2Serial

ADG731MCP2515-XSOTJA1050T

CAN2Serial bill of materials (BOM)

33 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ADG731
ATmega328P-PU-TQFP-Arduino
U1
1
MCP2515-XSO
MCP2515-xSO
U2
1
TJA1050T
MAX232
U3
1
8MHZ
8MHz
Y1
1
16MHZ
16MHz
Y2
1
Conn_ICSP
J1
1
CONN_GPIO2
CAN_conn
J2
1
Serial_TTL_Conn
J3
1
CONN_CAN_2
232_Conn
J4
1
CONN_T21-T32
GPIO_Conn
J5
1
CONN_T1-T10
Power_conn
J6
1
JUMPER_3_OPEN
232_EN
JP1
1
JUMPER_3_OPEN
EndBus_R_Jumper
JP2
1
100N
100n
C1
1
27PF
100n
C2
1
27PF
22pF
C3
1
100N
22pF
C4
2
22pF
C5, C6
1
100nF
C7
2
1uF
C8, C9
Show 10 more
QtyPartRefs
1
12-22PF
1uF
C10
1
100N
1uF
C11
1
100NF
1uF
C12
1
10N
1uF
C13
1
10K
1M
R1
1
120R
220R
R2
1
10K
220R
R3
1
1M
R4
2
10k
R5, R6
1
120R
R7

CAN2Serial design files

The KiCad project lives in the AugustoS97/BMS-BatterySystem repository on GitHub; these links point at the commit this page was built from.

CAN2Serial: common questions

What microcontroller does the CAN2Serial use?

The CAN2Serial is built around the ADG731, from the AVR/Arduino family.

How big is the CAN2Serial PCB?

The CAN2Serial measures 67.3 × 52.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CAN2Serial?

33 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CAN2Serial design files?

From the AugustoS97/BMS-BatterySystem repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the CAN2Serial design in my own project?

Yes, under the terms of its GPL-3.0 license, which AugustoS97 chose for the repository.

Can I test firmware for the CAN2Serial without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in BMS-BatterySystem

Similar boards