H-bridge controller
avi-guha·ROBOT·Electrical/PCB/H-bridge_controller/H-bridge_controller.kicad_pcb
About the H-bridge controller PCB
H-bridge controller is an open source PCB design by avi-guha, published on GitHub. It is a 2-layer board measuring 107.5 × 40.5 mm, with 30 components from 11 distinct parts.
It belongs with the robotics & motion designs in this gallery.
From the project
1. Clone this repo to your local device. git clone https://github.com/KazuoCalvin/ENPH-253-ROBO-SUMMER-.git
1. Clone this repo to your local device. git clone https://github.com/KazuoCalvin/ENPH-253-ROBO-SUMMER-.git
For your first time, use git fetch origin git checkout -b your-branch-name origin/your-branch-name
From next time, to switch branches, use git checkout (Personal Branch name)
3. Commit and Push in Personal Branch git commit -m "concise, but descriptive message" git push origin (Personal Branch name)
H-bridge controller bill of materials (BOM)
30 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_01X05_PIN Conn_01x05_Pin | JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J3 |
| 1 | Conn_01x02_Pin | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | Batt_con1 |
| 1 | 100u | CP_Radial_D6.3mm_P2.50mm | C_HBcon1_LF1 |
| 2 | ~ | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | Conn_HB1_Motor1, Conn_HB1_Motor2 |
| 8 | ~ | TO-220-3_Vertical | FET_HB1_A_Top1, FET_HB1_A_bott1, FET_HB1_B_Top1, FET_HB1_B_bott1, FET_HB2_A_Top1, FET_HB2_A_bott1, FET_HB2_B_Top1, FET_HB2_B_bott1 |
| 4 | VN2222LL-G | TO-92_Inline | FET_HB1_A_prot1, FET_HB1_B_prot1, FET_HB2_A_prot1, FET_HB2_B_prot1 |
| 1 | LT1161CN-PBF | DIP-20_W7.62mm | HBcon1 |
| 2 | 100nF | C_Disc_D3.4mm_W2.1mm_P2.50mm | Motor1_Capacitor1, Motor2_Capacitor1 |
| 4 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_HB1_A1, R_HB1_B1, R_HB2_A1, R_HB2_B1 |
| 4 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_HB1_A_Input1, R_HB1_B_Input1, R_HB2_A_Input1, R_HB2_B_Input1 |
| 2 | MCT6 | DIP-8_W7.62mm | U_HB1_isolation1, U_HB2_Isolation1 |
H-bridge controller design files
The KiCad project lives in the avi-guha/ROBOT repository on GitHub; these links point at the commit this page was built from.
H-bridge controller: common questions
How big is the H-bridge controller PCB?
The H-bridge controller measures 107.5 × 40.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the H-bridge controller?
30 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the H-bridge controller design files?
From the avi-guha/ROBOT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the H-bridge controller design in my own project?
The repository has no license, so all rights stay with avi-guha. Use it as a reference, and ask the author before reusing the design.
More boards in ROBOT
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979