Schmitt trigger breakout board
avi-guha·ROBOT·Electrical/PCB/Schmitt-trigger_breakout_board/Schmitt-trigger_breakout_board.kicad_pcb
About the Schmitt trigger breakout board
Schmitt trigger breakout board is an open source PCB design by avi-guha, published on GitHub. It is a 2-layer board measuring 35 × 24 mm, with 10 components from 6 distinct parts.
Other key parts include the LM311.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
From the project
1. Clone this repo to your local device. git clone https://github.com/KazuoCalvin/ENPH-253-ROBO-SUMMER-.git
1. Clone this repo to your local device. git clone https://github.com/KazuoCalvin/ENPH-253-ROBO-SUMMER-.git
For your first time, use git fetch origin git checkout -b your-branch-name origin/your-branch-name
From next time, to switch branches, use git checkout (Personal Branch name)
3. Commit and Push in Personal Branch git commit -m "concise, but descriptive message" git push origin (Personal Branch name)
Main components on the Schmitt trigger breakout board
Schmitt trigger breakout board bill of materials (BOM)
10 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM311 | DIP-8_W7.62mm | U1 |
| 1 | 0.47u | CP_Radial_D6.3mm_P2.50mm | C_LP1 |
| 1 | Conn_01x02_Pin | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J_SW1 |
| 1 | Conn_01x03_Pin | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J_out1 |
| 4 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R_LP1, R_ST_shifter1, R_vdiv_b1, R_vdiv_t1 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R_Output_pullup1, R_SW_pullup1 |
Schmitt trigger breakout board design files
The KiCad project lives in the avi-guha/ROBOT repository on GitHub; these links point at the commit this page was built from.
Schmitt trigger breakout board: common questions
How big is the Schmitt trigger breakout board?
The Schmitt trigger breakout board measures 35 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Schmitt trigger breakout board?
10 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Schmitt trigger breakout board design files?
From the avi-guha/ROBOT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Schmitt trigger breakout board design in my own project?
The repository has no license, so all rights stay with avi-guha. Use it as a reference, and ask the author before reusing the design.
More boards in ROBOT
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k