GOONER2000

avi-guha·ROBOT·Electrical/PCB/GOONER2000/GOONER2000.kicad_pcb

GOONER2000 PCB layout, top view — open source ESP32 board by avi-guha

About the GOONER2000 PCB

GOONER2000 is an open source ESP32 PCB design by avi-guha, published on GitHub. It is a 4-layer board measuring 142 × 110 mm, with 99 components from 22 distinct parts.

Its main chip is the ESP32_Pico_Devkit, from the ESP32 family. Other key parts include the LM311, MCT62H, L7805 and POLOLU_BREAKOUT_DRV8825. By type, the board carries 28 connectors, 15 ICs, 11 capacitors and 3 modules.

It belongs with the robotics & motion designs in this gallery.

From the project

1. Clone this repo to your local device. git clone https://github.com/KazuoCalvin/ENPH-253-ROBO-SUMMER-.git

1. Clone this repo to your local device. git clone https://github.com/KazuoCalvin/ENPH-253-ROBO-SUMMER-.git

For your first time, use git fetch origin git checkout -b your-branch-name origin/your-branch-name

From next time, to switch branches, use git checkout (Personal Branch name)

3. Commit and Push in Personal Branch git commit -m "concise, but descriptive message" git push origin (Personal Branch name)

Main components on the GOONER2000

GOONER2000 bill of materials (BOM)

99 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
6
LM311
U1, U2, U4, U5, U6, U9
5
MCT62H
U3, U11, U13, U14, U15
2
L7805
U7, U10
1
~
U8
1
~
U12
3
POLOLU_BREAKOUT_DRV8825
Pololu_Breakout_DRV8825
A1, A2, A3
2
CONN_01X05_SOCKET
Conn_01x05_Socket
J1, J9
9
CONN_01X04_SOCKET
Conn_01x04_Socket
J2, J3, J6, J7, J8, J11, J22, J23 +1
10
CONN_01X03_SOCKET
Conn_01x03_Socket
J4, J5, J10, J12, J13, J14, J15, J16 +2
1
CONN_01X03_SOCKET
Conn_01x02_Socket
J18
1
CONN_01X02_SOCKET
Conn_01x02_Socket
J19
1
CONN_01X04_SOCKET
Conn_01x04_Socket
J21
1
RASPBERRY_PI_4
Raspberry_Pi_4
J24
3
Conn_02x03_Odd_Even
J28, J29, J30
6
R_Potentiometer
RV1, RV2, RV3, RV4, RV5, RV6
2
100k
RV_Kd1, RV_Kp1
20
1k
R_CLAW_PWM1, R_CLAW_PWM_P1, R_DHES_PU1, R_IRED_LEFT1, R_IRED_LEFT_PU1, R_IRED_RIGHT1, R_IRED_RIGHT_PU1, R_IRLF_BACKUP1 +12
13
100
R_IRED_LEFT_LED1, R_IRED_RIGHT_LED1, R_IRLF_BACKUP_LED1, R_IRLF_LEFT_LED1, R_IRLF_RIGHT_LED1, R_PWM_BU1, R_PWM_BU2, R_SM1_DIR1 +5
1
R
R_SM3_DIR2
1
47P
47p
C1
Show 2 more
QtyPartRefs
4
47U
47u
C2, C6, C7, C8
6
100P
100p
C3, C4, C5, C9, C10, C11

GOONER2000 design files

The KiCad project lives in the avi-guha/ROBOT repository on GitHub; these links point at the commit this page was built from.

GOONER2000: common questions

What microcontroller does the GOONER2000 use?

The GOONER2000 is built around the ESP32_Pico_Devkit, from the ESP32 family.

How big is the GOONER2000 PCB?

The GOONER2000 measures 142 × 110 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the GOONER2000?

99 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the GOONER2000 design files?

From the avi-guha/ROBOT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the GOONER2000 design in my own project?

The repository has no license, so all rights stay with avi-guha. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the GOONER2000 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ROBOT

Similar boards