Ch32duino

avycado13·ch32duino

Ch32duino PCB layout, top view — open source RISC-V board by avycado13

About the Ch32duino PCB

Ch32duino is an open source RISC-V PCB design by avycado13, published on GitHub. It is a 2-layer board measuring 52 × 21 mm, with 13 components from 10 distinct parts.

Its main chip is the CH32V203C8T6, from the RISC-V family. Other key parts include the AMS1117-3.3. By type, the board carries 4 connectors, 4 resistors, 2 ICs, 2 capacitors and 1 switch.

Ch32duino, from the project README
From the project README

Main components on the Ch32duino

Ch32duino bill of materials (BOM)

13 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH32V203C8T6
CH32V203CxTx
U1
1
AMS1117-3.3
U2
1
Analog
J1
1
Digital
J2
1
TYPE-C-31-M-12
USB_C_Receptacle_USB2.0_14P
J3
1
ICSP
J4
1
SH-6X6X5H-CJ
SW_Push
SW1
2
100NF
100nF
C1, C2
2
10K
10k
R1, R2
2
5.1K
5.1k
R3, R4

Ch32duino design files

The KiCad project lives in the avycado13/ch32duino repository on GitHub; these links point at the commit this page was built from.

Ch32duino: common questions

What microcontroller does the Ch32duino use?

The Ch32duino is built around the CH32V203C8T6, from the RISC-V family.

How big is the Ch32duino PCB?

The Ch32duino measures 52 × 21 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ch32duino?

13 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ch32duino design files?

From the avycado13/ch32duino repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ch32duino design in my own project?

The repository has no license, so all rights stay with avycado13. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ch32duino without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

More boards in ch32duino

Similar boards