15 open source boards using the CH32V203C8T6

Real designs built with the CH32V203C8T6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the CH32V203C8T6

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the CH32V203C8T6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDA pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 1 µF).
  • The VDD_VIO1 pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 1 µF).
  • The VDD_2 pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 1 µF).
  • The VDD_VIO_3 pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF.
VBATpin 1Connected to: 3.3V 77% · not connected 15%
  • Decoupling capacitor on 77% · 100 nF (8)
PC15_OSC32OUTpin 4Connected to: Not connected 62% · a signal 38%
OSC_IN_PD0pin 5Connected to: Signal 62% · not connected 38%
  • Capacitor to GND on 46% · 22 pF (2), 20 pF (1), 33 pF (1)
  • Crystal on 38% · 8 MHz (4), 12 MHz (1)
OSC_OUT_PD1pin 6Connected to: Signal 62% · not connected 38%
  • Capacitor to GND on 46% · 22 pF (2), 20 pF (1), 33 pF (1)
  • Crystal on 38% · 8 MHz (4), 12 MHz (1)
NRSTpin 7Connected to: A connector 31%
  • Pull-up to 3.3V on 62% · 10 kΩ (3), 1 kΩ (1), 4.7 kΩ (1)
  • Capacitor to GND on 62% · 100 nF (8)
VSSApin 8Connected to: GND 100%
VDDApin 9Connected to: 3.3V 100%
  • Decoupling capacitor on 85% · 100 nF (8), 1 µF (1)
PB2pin 20Connected to: Signal 62% · not connected 15% · GND 23%
  • Resistor to GND on 46% · 10 kΩ (5), 5.1 kΩ (1)
VSS1pin 23Connected to: GND 100%
VDD_VIO1pin 24Connected to: 3.3V 100%
  • Decoupling capacitor on 85% · 100 nF (8), 1 µF (1), 10 µF (1)
VSS_2pin 35Connected to: GND 100%
VDD_2pin 36Connected to: 3.3V 100%
  • Decoupling capacitor on 85% · 100 nF (9), 1 µF (1)
BOOT0pin 44Connected to: A connector 23% · GND 38%
  • Resistor to GND on 46% · 10 kΩ (5), 5.1 kΩ (1)
VSS_3pin 47Connected to: GND 100%
VDD_VIO_3pin 48Connected to: 3.3V 100%
  • Decoupling capacitor on 85% · 100 nF (10)

33 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RISKYKVM by arkadiuszmakarenko, CH32V203-ProMicro-Like by 74th, Tanmatsu hardware by Nicolai-Electronics and MC-10 Tape Emulator by SteveLRojas.

The CH32V203C8T6 in open source designs

The gallery holds 15 open source boards using the CH32V203C8T6 from 13 GitHub repositories; a typical one measures about 52 × 50.8 mm and carries around 27 components.

53% use four copper layers or more, and 47% carry an open source license.

The most starred is RISKYKVM by arkadiuszmakarenko.

Microcontrollers on boards using the CH32V203C8T6

CH32V203C8T6: common questions

Where can I find a CH32V203C8T6 reference design?

Each of the 15 boards on this page is a real design using the CH32V203C8T6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the CH32V203C8T6 VDDA pin?

The VDDA pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the CH32V203C8T6.

What decoupling capacitors do designs use on the CH32V203C8T6 VDD_VIO1 pin?

The VDD_VIO1 pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the CH32V203C8T6.

What decoupling capacitors do designs use on the CH32V203C8T6 VDD_2 pin?

The VDD_2 pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the CH32V203C8T6.

What parts are used alongside the CH32V203C8T6?

The AMS1117-3.3, LM1117MP-3.3, 74LVC2G02HD4-7, AP3032KTR and BMI270 appear in the most repositories here.

Which microcontrollers do boards using the CH32V203C8T6 use?

Most are built on RISC-V (12), ESP32 (2) and STM32 (1).

How big is a typical board using the CH32V203C8T6?

The median is 52 × 50.8 mm, and 47% are two-layer designs.

What is the most popular open source board using the CH32V203C8T6?

By GitHub stars, RISKYKVM by arkadiuszmakarenko, with 14 stars.

Can I simulate one of these boards using the CH32V203C8T6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part