Panelized
avycado13·ch32duino
About the Panelized PCB
Panelized is an open source RISC-V PCB design by avycado13, published on GitHub. It is a 2-layer board measuring 52 × 84 mm, with 13 components from 10 distinct parts.
Its main chip is the CH32V203C8T6, from the RISC-V family. Other key parts include the AMS1117-3.3. By type, the board carries 4 connectors, 4 resistors, 2 ICs, 2 capacitors and 1 switch.
Main components on the Panelized
Panelized bill of materials (BOM)
13 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH32V203C8T6 CH32V203CxTx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | Analog | PinHeader_1x17_P2.54mm_Vertical | J1 |
| 1 | Digital | PinHeader_1x17_P2.54mm_Vertical | J2 |
| 1 | TYPE-C-31-M-12 USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | ICSP | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | SH-6X6X5H-CJ SW_Push | SW_PUSH_6mm | SW1 |
| 2 | 100NF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 5.1K 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
Panelized design files
The KiCad project lives in the avycado13/ch32duino repository on GitHub; these links point at the commit this page was built from.
- Layoutpanelized.kicad_pcb
- BOMREADME.md
Panelized: common questions
What microcontroller does the Panelized use?
The Panelized is built around the CH32V203C8T6, from the RISC-V family.
How big is the Panelized PCB?
The Panelized measures 52 × 84 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Panelized?
13 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Panelized design files?
From the avycado13/ch32duino repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Panelized design in my own project?
The repository has no license, so all rights stay with avycado13. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Panelized without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in ch32duino
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105