Palma

AwesomeSno·Palma·KiCad/kc01/kc01.kicad_sch

This repository ships a schematic but no board layout.

About the Palma PCB

Palma is an open source ESP32 PCB design by AwesomeSno, published on GitHub. It is a board, with 1 components from 1 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family.

It belongs with the iot & wireless designs in this gallery.

From the project

An ESP32-S3 band that recognizes hand gestures on-device with a tiny neural net and sends commands over BLE and ESP-NOW.

A tiny wristband made with the ESP32-S3 that recognizes hand gestures using a tiny neural network. Use it to send commands and instructions to computers, automation systems, or even robotic arms, all from your wrist.

1. The BNO085 IMU measures wrist motion and orientation many times per second. 2. The ESP32-S3 collects short windows of this motion data. 3. A tiny neural network running on the ESP identifies which gesture the motion matches with. All locally on the wristband. 4. A binding table maps each recognized gesture to an action you programmed to it. Like for example, play/pause…

Main components on the Palma

Palma bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1

Palma design files

The KiCad project lives in the AwesomeSno/Palma repository on GitHub; these links point at the commit this page was built from.

Palma: common questions

What microcontroller does the Palma use?

The Palma is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How many components are on the Palma?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Palma design files?

From the AwesomeSno/Palma repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Palma design in my own project?

The repository has no license, so all rights stay with AwesomeSno. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Palma without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards