KinetiCoreDC

axpaul·KinetiCoreDC

This repository ships a schematic but no board layout.

About the KinetiCoreDC PCB

KinetiCoreDC is an open source STM32 PCB design by axpaul, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board, with 52 components from 28 distinct parts.

Its main chip is the STM32G070KBT6, from the STM32 family. Other key parts include the SN74LVC2G14DBV, THVD1400D, MCP1703Ax-330xxDB, TLP2310 and LTC4365TS8. By type, the board carries 23 resistors, 9 ICs, 8 capacitors, 7 diodes, 2 transistors and 1 connector.

It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.

From the project

Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.

Carte de contrôle moteur basée sur un microcontrôleur STM32G0 (STM32G070KBT6) conçue pour piloter des moteurs DC à l'aide de ponts en H intégrés DRV8874 (Texas Instruments).

- Microcontrôleur : STM32G070KBT6 (ARM Cortex-M0+) - Driver moteur : DRV8874 (pilotage moteur DC avec mesure de courant et protections intégrées) - Communication & Interfaces : - Bus RS485 (transceiver THVD1400) - Bus I2C avec extenseur d'E/S (TCA9534A) - Entrées isolées / optocoupleurs (TLP2310) - Alimentation & Protections : - Contrôleur de surtension / sous-tension et protection contre les inversions de polarité…

Main components on the KinetiCoreDC

KinetiCoreDC bill of materials (BOM)

52 components, 28 distinct parts.

QtyPartRefs
1
STM32G070KBT6
U1
1
SN74LVC2G14DBV
U2
2
THVD1400D
U4, U6
1
MCP1703Ax-330xxDB
U5
2
TLP2310
U7, U8
1
LTC4365TS8
U9
1
WE-TVS-82400102
U11
2
BSN20
Q1, Q2
1
B2B-XH-A
JST
J7
1
1206L035YR
1206L035/16YR1
1
744222
FL1
1
BAT54S
D1
1
SM712_SOT23
D2
2
LED_Small
D5, D7
1
SMAJ15CA
D6
2
SMAJ5.0A
D10, D11
8
100nF
C1, C2, C3, C4, C5, C6, C9, C10
4
100R
R1, R6, R11, R12
4
470R
R2, R4, R13, R14
2
1K
R3, R5
Show 8 more
QtyPartRefs
2
10K
R7, R8
2
2.2K
R9, R10
2
10R
R15, R16
1
120R
R17
2
0R
R21, R22
1
100k
R23
1
1.2M
R24
2
150K
R25, R26

KinetiCoreDC design files

The KiCad project lives in the axpaul/KinetiCoreDC repository on GitHub; these links point at the commit this page was built from.

KinetiCoreDC: common questions

What microcontroller does the KinetiCoreDC use?

The KinetiCoreDC is built around the STM32G070KBT6, from the STM32 family.

How big is the KinetiCoreDC PCB?

The KinetiCoreDC has 2 copper layers and is 1.6 mm thick.

How many components are on the KinetiCoreDC?

52 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the KinetiCoreDC design files?

From the axpaul/KinetiCoreDC repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the KinetiCoreDC design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which axpaul chose for the repository.

Can I test firmware for the KinetiCoreDC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards