11 open source boards using the SN74LVC2G14DBV
Real designs built with the SN74LVC2G14DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
OpenTRV-ESP
mpiraux
45 × 53 mm58 parts4LCERN-OHL-P-2.02RoboTheater
offmor
32 × 32 mm14 parts2LMIT2Project-Trace
LauKH312
100 × 100 mm118 parts4LNo license1PIC
SafeChicks
WouterThys
40 × 53 mm54 parts2LNo license0- schematic only · 150 partsPIC
PetSafe
kerby2000
150 partsNo license0 - schematic only · 52 partsSTM32
KinetiCoreDC
axpaul
52 parts2LCERN-OHL-S-2.00 AVR/Arduino
MEP MAXI 85V-1 REV 2 Keypad
JGilcreast
209 × 97.3 mm203 parts4LNo license0RC2014-RAM-ROM-NoBanking
dennisperry
104 × 69 mm38 parts2LNo license0Unicontroller FDCAN head
jarekkt
82.5 × 75.5 mm76 parts4LNo license6STM32
INV Discrete Controller
NTURacingTeam
100 × 100 mm351 parts4LNo license0RC2014-FDC-V22
dennisperry
104 × 37.5 mm15 parts2LNo license0
How designs wire the SN74LVC2G14DBV
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the SN74LVC2G14DBV connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1Apin 1 | Connected to: TB6612FNG 38%, the microcontroller 25% |
|
| GNDpin 2 | Connected to: GND 88% | — |
| 2Apin 3 | Connected to: TB6612FNG 38%, the microcontroller 25% |
|
| VCCpin 5 | Connected to: 3.3V 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Unicontroller FDCAN head by jarekkt, OpenTRV-ESP by mpiraux, RoboTheater by offmor and Project-Trace by LauKH312.
The SN74LVC2G14DBV in open source designs
The gallery holds 11 open source boards using the SN74LVC2G14DBV from 10 GitHub repositories; a typical one measures about 100 × 69 mm and carries around 58 components.
50% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.
The most starred is Unicontroller FDCAN head by jarekkt.
Parts used alongside the SN74LVC2G14DBV
Microcontrollers on boards using the SN74LVC2G14DBV
What boards using the SN74LVC2G14DBV are built for
SN74LVC2G14DBV: common questions
Where can I find a SN74LVC2G14DBV reference design?
Each of the 11 boards on this page is a real design using the SN74LVC2G14DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC2G14DBV VCC pin?
The VCC pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the SN74LVC2G14DBV.
Which microcontrollers do boards using the SN74LVC2G14DBV use?
Most are built on PIC (2), STM32 (2), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the SN74LVC2G14DBV?
The median is 100 × 69 mm, and 50% are two-layer designs.
What is the most popular open source board using the SN74LVC2G14DBV?
By GitHub stars, Unicontroller FDCAN head by jarekkt, with 6 stars.
Can I simulate one of these boards using the SN74LVC2G14DBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.