21 open source boards using the WE-TVS-82400102
Real designs built with the WE-TVS-82400102, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Gk pcbv3
jncronin
108 × 158.8 mm276 parts6LNo license78STM32
SPIN
owntech-foundation
21 × 51 mm34 parts4LNo license15AVR/Arduino
ELiXiVy
minibois
302.2 × 93.5 mm166 parts2LNo license10Raspberry Pi
CompactPi
loganrf
47 × 105 mm147 parts6LCERN-OHL-S-2.02ModBus-RJ45-Breakout-2
the78mole
87 × 68 mm116 parts2LTAPR-OHL-1.01Pluto jtag adapter
teodor961
53 × 34.2 mm64 parts2LNo license1Nordic nRF
Chonc60
mildlyfunctionalgays
297 × 132 mm356 parts2LNo license0STM32
OshTelemega
Kev1n8088
30 × 80 mm151 parts4LNo license0RP2040/RP2350
Usb headphone amp
embediver
50 × 85 mm135 parts2LNo license0STM32
Mainboard
evolutek
115 × 70 mm116 parts2LNo license0ESP32
Multi-Ferro-DAQ
TUDA-MUST
50 × 65 mm116 parts4LNo license0USB 2.0 Smart 4 port hub on GL852
shworker
100 × 100 mm100 parts2LNo license0STM32
H503-0.2
jrengdahl
50.8 × 20.3 mm47 parts4LBSD-3-Clause0- schematic only · 67 partsESP32
NodeHealthMonitor
aniketdebnath
67 partsMIT0 - schematic only · 52 partsSTM32
KinetiCoreDC
axpaul
52 parts2LCERN-OHL-S-2.00 STM32
Gk
jncronin
120.7 × 110 mm245 parts6LNo license78STM32
Cameraboard
AFS-pt
46.1 × 45.6 mm77 parts4LNo license15STM32
H503-0.3
jrengdahl
50.8 × 20.3 mm47 parts4LBSD-3-Clause0STM32
MosaicCarrier
Kev1n8088
30 × 48.3 mm19 parts4LNo license0STM32
Carte stepper
evolutek
70 × 50 mm51 parts2LNo license0STM32
H503
jrengdahl
50.8 × 20.3 mm46 parts4LBSD-3-Clause0
How designs wire the WE-TVS-82400102
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the WE-TVS-82400102 connects to, and the resistors, capacitors and other passives placed on it.
- The VBUS pin has a decoupling capacitor on 6 of 15 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 93% | — |
| VBUSpin 5 | Connected to: VBUS 67% · a signal 27% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Gk by jncronin, Cameraboard by AFS-pt, SPIN by owntech-foundation and ELiXiVy by minibois.
The WE-TVS-82400102 in open source designs
The gallery holds 21 open source boards using the WE-TVS-82400102 from 17 GitHub repositories; a typical one measures about 50.8 × 68 mm and carries around 100 components.
55% use four copper layers or more, and 33% carry an open source license.
The most starred is Gk pcbv3 by jncronin.
Parts used alongside the WE-TVS-82400102
Microcontrollers on boards using the WE-TVS-82400102
What boards using the WE-TVS-82400102 are built for
WE-TVS-82400102: common questions
Where can I find a WE-TVS-82400102 reference design?
Each of the 21 boards on this page is a real design using the WE-TVS-82400102. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the WE-TVS-82400102 VBUS pin?
The VBUS pin has a decoupling capacitor on 6 of 15 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 15 open source designs using the WE-TVS-82400102.
What parts are used alongside the WE-TVS-82400102?
The MCP73831-2-OT, 93LC46B, MCP2551-I-SN, MMC5983MA and NCP718xSN330 appear in the most repositories here.
Which microcontrollers do boards using the WE-TVS-82400102 use?
Most are built on STM32 (12), ESP32 (2), AVR/Arduino (1) and Nordic nRF (1).
How big is a typical board using the WE-TVS-82400102?
The median is 50.8 × 68 mm, and 45% are two-layer designs.
What is the most popular open source board using the WE-TVS-82400102?
By GitHub stars, Gk pcbv3 by jncronin, with 78 stars.
Can I simulate one of these boards using the WE-TVS-82400102 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.