HardLabs

Sensirion sht35-breakout

aycaozkann·sensirion-sht35-breakout

Sensirion sht35-breakout layout, top view — open source board by aycaozkann
Simulate this board

About the Sensirion sht35-breakout

Sensirion sht35-breakout is an open source PCB design by aycaozkann, published on GitHub. It is a 2-layer board measuring 16.5 × 20 mm, with 6 components from 5 distinct parts.

Other key parts include the SHT35-DIS-B2.5KS. By type, the board carries 3 resistors, 1 IC, 1 connector and 1 capacitor.

It belongs with the sensors and dev boards & breakouts designs in this gallery.

From the project

SHT35 I2C temperature/humidity sensor breakout board — KiCad schematic + PCB, DRC/ERC clean, fab-ready gerbers/BOM/PnP

Sensirion SHT35-DIS-B I2C sıcaklık ve nem sensörü için KiCad'de tasarlanmış, kompakt ve üretime hazır bir breakout kart.

- Sensör: Sensirion SHT35-DIS-B (8 pin DFN, 2.5×2.5 mm), I2C, ±0.1 °C / ±%1.5 RH doğruluk - Besleme: doğrudan +5V, kart üzerinde LDO yok (SHT35'in 2.15–5.5 V giriş aralığı, datasheet Tablo 3/6'ya göre 5 V'u payla karşılıyor) - Arayüz: 1×6 header — VCC(+5V), GND, SDA, SCL, nRESET, ALERT - I2C adresi: sabit 0x44 — ADDR pini kart üzerinde GND'ye çekilmiş (header'da dışarı çıkarılmamış), datasheet §3.2'ye göre havada bırakmak yerine - Pull-up'lar: SDA/SCL üzerinde +5V…

Main components on the Sensirion sht35-breakout

SHT35-DIS-B2.5KS

Sensirion sht35-breakout bill of materials (BOM)

6 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SHT35-DIS-B2.5KS
SHT35-DIS
Sensirion
U1
1
2.54-1x6P (generic)
Conn_01x06
Generic/Various (jenerik, birbirinin yerine kullanılabilir)
J1
1
CC0603KRX7R9BB104
100nF
Yageo
C1
2
RC0603FR-074K7L
4.7k
Yageo
R1, R2
1
RC0603FR-0710KL
10k
Yageo
R3

Sensirion sht35-breakout design files

The KiCad project lives in the aycaozkann/sensirion-sht35-breakout repository on GitHub; these links point at the commit this page was built from.

Sensirion sht35-breakout: common questions

How big is the Sensirion sht35-breakout?

The Sensirion sht35-breakout measures 16.5 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sensirion sht35-breakout?

6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sensirion sht35-breakout design files?

From the aycaozkann/sensirion-sht35-breakout repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Sensirion sht35-breakout design in my own project?

The repository has no license, so all rights stay with aycaozkann. Use it as a reference, and ask the author before reusing the design.

Similar boards