Smart parking guidance system
aymanmali·smart-parking-guidance-system·hardware/kicad/SPG-CTRL-v1.kicad_pcb
About the Smart parking guidance system PCB
Smart parking guidance system is an open source ESP32 PCB design by aymanmali, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 55 mm, with 1 components from 1 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family.
It belongs with the iot & wireless designs in this gallery.
From the project
Automated 300-slot computer-vision parking guidance & management system (Python, PyTorch, OpenCV, YOLO, FastAPI, React, ESP32 Embedded C, KiCad PCB)
Custom 2-layer KiCad PCB designed to drive physical Entrance Counter Displays and Intersection Directional Guidance Signs in the 300-slot parking facility.
Main components on the Smart parking guidance system
Smart parking guidance system bill of materials (BOM)
1 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E | U3 |
Smart parking guidance system design files
The KiCad project lives in the aymanmali/smart-parking-guidance-system repository on GitHub; these links point at the commit this page was built from.
Smart parking guidance system: common questions
What microcontroller does the Smart parking guidance system use?
The Smart parking guidance system is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the Smart parking guidance system PCB?
The Smart parking guidance system measures 80 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smart parking guidance system?
1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Smart parking guidance system design files?
From the aymanmali/smart-parking-guidance-system repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Smart parking guidance system design in my own project?
Yes, under the terms of its MIT license, which aymanmali chose for the repository.
Can I test firmware for the Smart parking guidance system without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k