128 open source boards using the ESP32-WROOM-32E

Real designs built with the ESP32-WROOM-32E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

128 boardsClear filters|Most starred

How designs wire the ESP32-WROOM-32E

Read from the KiCad layouts of 97 open source designs, one per repository: what each pin of the ESP32-WROOM-32E connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a pull-up to 3.3V on 77 of 96 designs, most often 10 kΩ.
  • The EN pin has a capacitor to GND on 66 of 96 designs, most often 100 nF (then 1 µF).
  • The SENSOR_VN pin is left unconnected on 68 of 94 designs (GND on 2, a signal on 23).
  • The SENSOR_VP pin is left unconnected on 65 of 94 designs (a signal on 29).
GNDpin 1, 15, 38, 39Connected to: GND 94%
VDDpin 2Connected to: 3.3V 87%
  • Decoupling capacitor on 51% · 100 nF (47), 10 µF (22), 22 µF (14)
ENpin 3Connected to: A connector 32%
  • Pull-up to 3.3V on 80% · 10 kΩ (75)
  • Capacitor to GND on 69% · 100 nF (53), 1 µF (21), 10 µF (3)
SENSOR_VPpin 4Connected to: Not connected 69% · a signal 31%
SENSOR_VNpin 5Connected to: Not connected 72% · a signal 24%
NCpin 17, 18, 19, 20, 21, 22, 32Connected to: Not connected 98%
IO0pin 25Connected to: A connector 34%
  • Pull-up to 3.3V on 44% · 10 kΩ (39), 4.7 kΩ (1)

23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Uncut Gem by QuantumVillage, EsperDNS by zachmorr, Lsa by SRA-VJTI and Unijoysticle 2 A500 by ricardoquesada.

The ESP32-WROOM-32E in open source designs

The gallery holds 128 open source boards using the ESP32-WROOM-32E from 110 GitHub repositories; a typical one measures about 68.1 × 62 mm and carries around 44 components.

72% are two-layer designs, the rest use four layers or more, and 41% carry an open source license.

The most starred is Uncut Gem by QuantumVillage.

Microcontrollers on boards using the ESP32-WROOM-32E

ESP32-WROOM-32E: common questions

Where can I find a ESP32-WROOM-32E reference design?

Each of the 128 boards on this page is a real design using the ESP32-WROOM-32E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the ESP32-WROOM-32E EN pin?

The EN pin has a pull-up to 3.3V on 77 of 96 designs, most often 10 kΩ. Counted from the KiCad layouts of 97 open source designs using the ESP32-WROOM-32E.

How is the ESP32-WROOM-32E SENSOR_VN pin connected?

The SENSOR_VN pin is left unconnected on 68 of 94 designs (GND on 2, a signal on 23). Counted from the KiCad layouts of 97 open source designs using the ESP32-WROOM-32E.

How is the ESP32-WROOM-32E SENSOR_VP pin connected?

The SENSOR_VP pin is left unconnected on 65 of 94 designs (a signal on 29). Counted from the KiCad layouts of 97 open source designs using the ESP32-WROOM-32E.

What parts are used alongside the ESP32-WROOM-32E?

The AMS1117-3.3, CH340C, AP2112K-3.3, MPU-6050 and TP4056-42-ESOP8 appear in the most repositories here.

Which microcontrollers do boards using the ESP32-WROOM-32E use?

Most are built on ESP32 (128).

How big is a typical board using the ESP32-WROOM-32E?

The median is 68.1 × 62 mm, and 72% are two-layer designs.

What is the most popular open source board using the ESP32-WROOM-32E?

By GitHub stars, Uncut Gem by QuantumVillage, with 197 stars.

Can I simulate one of these boards using the ESP32-WROOM-32E before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part