Smart home software
azaslavskis·smart-home-software·Hardware/main.kicad_pcb
About the Smart home software PCB
Smart home software is an open source ESP32 PCB design by azaslavskis, published on GitHub under the MIT license. It is a 2-layer board measuring 62.1 × 60.6 mm, with 40 components from 22 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the MIC4680-5.0YM, DS18S20Z, SN74AHC1G32DBVR, MCP1826ST-3302E/DB and SN65HVD230DR. By type, the board carries 11 resistors, 10 capacitors, 6 ICs, 6 diodes, 4 connectors and 2 transistors.
It belongs with the iot & wireless designs in this gallery.
From the project
Software for smart home project (e.g backup)
A complete software stack for managing and operating a smart home system, including a central hub and relay service. This project provides a streamlined build process and a responsive web UI for managing connected devices.
To build the project binaries, follow these steps:
Make sure the following are installed on your system: - idf.py) - Node.js - pnpm
The build process will generate two binaries: - smart-home-software-hub.bin - relay.bin
Main components on the Smart home software
Smart home software bill of materials (BOM)
40 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1U | U1 |
| 1 | MIC4680-5.0YM | SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U2 |
| 1 | DS18S20Z | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | SN74AHC1G32DBVR | DBV5 | U4 |
| 1 | MCP1826ST-3302E/DB | SOT-223 | U6 |
| 1 | SN65HVD230DR | SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U7 |
| 2 | MMBTA42 | SOT-23 | Q3, Q4 |
| 1 | DNP Header-1 | PinHeader_1x20_P2.54mm_Vertical | J1 |
| 3 | DNP Header-2 | PinHeader_1x20_P2.54mm_Vertical | J2, J3, J5 |
| 4 | SK6812 | LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D5, D6 |
| 1 | SS26 | D_SMA | D3 |
| 1 | LED | LED_0805_2012Metric | D4 |
| 1 | CDRH125NP-680MC | CDRH125101MC | L1 |
| 1 | F930J227MBA 6.3V 220uF | CAPPM3528X210N | C1 |
| 1 | 293D226X9035E2TE3 22uF 35V | CAPPM7343X430N | C2 |
| 8 | 100NF 100nF | C_0805_2012Metric | C3, C4, C5, C6, C7, C8, C9, C10 |
| 1 | 1K | R_0805_2012Metric | R1 |
| 1 | 4.7K | R_0805_2012Metric | R2 |
| 1 | 220R | R_0805_2012Metric | R3 |
| 4 | 0R | R_0805_2012Metric | R4, R7, R8, R11 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10K | R_0805_2012Metric | R5, R6, R9 |
| 1 | 120R | R_0805_2012Metric | R10 |
Smart home software design files
The KiCad project lives in the azaslavskis/smart-home-software repository on GitHub; these links point at the commit this page was built from.
Smart home software: common questions
What microcontroller does the Smart home software use?
The Smart home software is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Smart home software PCB?
The Smart home software measures 62.1 × 60.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smart home software?
40 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Smart home software design files?
From the azaslavskis/smart-home-software repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Smart home software design in my own project?
Yes, under the terms of its MIT license, which azaslavskis chose for the repository.
Can I test firmware for the Smart home software without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k