Analog and ad9958
About the Analog and ad9958 PCB
Analog and ad9958 is an open source PCB design by balmerdx, published on GitHub under the BSD-2-Clause license. It is a 4-layer board measuring 97.6 × 145.1 mm, with 215 components from 71 distinct parts.
Other key parts include the ADG736, SA612A, TS462, EL5166 and 25MHz. By type, the board carries 94 capacitors, 74 resistors, 21 ICs, 14 inductors, 6 crystals and 6 connectors.
From the project
Vector Network Analyzer 10 KHz - 180 MHz
Main components on the Analog and ad9958
Analog and ad9958 bill of materials (BOM)
215 components, 71 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | ADG736 | MSOP-10_3x3mm_Pitch0.5mm | IC1, IC2, IC3 |
| 3 | SA612A | SOIC-8-N | U1, U2, U3 |
| 3 | TS462 | SOIC-8-N | U4, U5, U6 |
| 2 | EL5166 | SOT-23-6 | U7, U8 |
| 1 | 25MHz | Crystal_5.0x3.2mm | U9 |
| 1 | AD9958 | CP-56-1 | U10 |
| 2 | TPS79318 | SOT-23-5 | U11, U12 |
| 1 | HT7333 | SOT89-3_Housing | U13 |
| 2 | LM7805CT | TO-220 | U14, U17 |
| 1 | SG053-SZ | SG053-SZ | U15 |
| 1 | LM2663 | SOIC-8-N | U16 |
| 1 | CP2102 | MLP-28 | U18 |
| 1 | RX | SMA-NORMAL | X1 |
| 1 | TX | SMA-NORMAL | X2 |
| 1 | RF_DDS | SMA-NORMAL-MY | X3 |
| 1 | LO_DDS | SMA-NORMAL-MY | X4 |
| 2 | SMA | SMA-NORMAL-MY | X5, X6 |
| 1 | CONN_RF | IDC_08M | P1 |
| 1 | DATA | IDC_08M | P2 |
| 1 | +9V | Pin_Header_Straight_1x02 | P3 |
Show 51 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB | Pin_Header_Straight_1x04 | P4 |
| 1 | POUT | Pin_Header_Straight_1x04 | P5 |
| 1 | UART | Pin_Header_Straight_1x04 | P6 |
| 1 | 100u | Resistor_Horizontal_RM10mm | L1 |
| 4 | 39nH | R_0805_HandSoldering | L2, L3, L4, L5 |
| 4 | 22nH | R_0805_HandSoldering | L6, L7, L8, L9 |
| 5 | 100Z | C_0805 | L10, L11, L12, L13, L14 |
| 10 | 1u | C_0603 | C1, C2, C3, C4, C5, C6, C7, C8 +2 |
| 41 | 100n | C_0603 | C10, C11, C12, C22, C23, C24, C25, C26 +33 |
| 3 | 100p | C_0603 | C13, C14, C15 |
| 6 | 22n | C_0603 | C16, C17, C18, C19, C20, C21 |
| 3 | 220u | c_elec_6.3x4.5 | C31, C84, C89 |
| 1 | 1n | C_0603 | C34 |
| 2 | 33u | c_elec_6.3x4.5 | C35, C87 |
| 4 | 27p | R_0805 | C42, C43, C44, C45 |
| 4 | 4.7p | R_0805 | C46, C47, C48, C49 |
| 4 | 33p | R_0805 | C50, C51, C52, C53 |
| 4 | 18p | R_0805 | C55, C56, C57, C58 |
| 4 | 22p | R_0805 | C59, C60, C61, C62 |
| 1 | 680p | C_0603 | C66 |
| 3 | 10u | C_0805 | C75, C76, C77 |
| 3 | 47u 10V | TantalC_SizeB_EIA-3528_HandSoldering | C81, C86, C96 |
| 1 | 2.2u | C_0805 | C94 |
| 6 | 49.9 | R_0603 | R1, R6, R7, R18, R46, R47 |
| 2 | 100 | R_0603 | R2, R43 |
| 1 | 150 | R_0603 | R3 |
| 3 | 33 | R_0603 | R4, R5, R10 |
| 1 | 18 | R_0603 | R8 |
| 2 | 68 | R_0805 | R9, R15 |
| 1 | 270 | R_0603 | R11 |
| 3 | 82 | R_0603 | R12, R13, R17 |
| 2 | 510 | R_0603 | R14, R16 |
| 2 | 33 | R_0805 | R19, R20 |
| 6 | 3K9 | R_0603 | R21, R22, R23, R24, R25, R26 |
| 6 | 27k | R_0603 | R27, R28, R32, R33, R37, R38 |
| 1 | 15k | R_0603 | R29 |
| 2 | 68k | R_0603 | R30, R31 |
| 2 | 10k | R_0603 | R34, R42 |
| 4 | 330k | R_0603 | R35, R36, R40, R41 |
| 1 | 22k | R_0603 | R39 |
| 2 | 5k1 | R_0603 | R44, R45 |
| 4 | 360 | R_0603 | R48, R49, R50, R51 |
| 4 | 180 | R_0603 | R52, R53, R54, R55 |
| 4 | 52 | R_0603 | R56, R57, R58, R59 |
| 1 | 4.7 | R_0603 | R60 |
| 4 | inf | R_0603 | R61, R62, R63, R64 |
| 6 | 30 | R_0603 | R65, R66, R70, R71, R72, R73 |
| 1 | 470 | R_0603 | R67 |
| 1 | 160 | R_0603 | R68 |
| 1 | 2k | R_0603 | R69 |
| 1 | 3k | R_Array_Concave_4x0402 | RN2 |
Analog and ad9958 design files
The KiCad project lives in the balmerdx/BalmerDX_VNA repository on GitHub; these links point at the commit this page was built from.
Analog and ad9958: common questions
How big is the Analog and ad9958 PCB?
The Analog and ad9958 measures 97.6 × 145.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Analog and ad9958?
215 components, from 71 distinct parts. The full bill of materials is listed on this page.
Where can I download the Analog and ad9958 design files?
From the balmerdx/BalmerDX_VNA repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Analog and ad9958 design in my own project?
Yes, under the terms of its BSD-2-Clause license, which balmerdx chose for the repository.
