8 open source boards using the HT7333
Real designs built with the HT7333, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Analog and ad9958
balmerdx
97.6 × 145.1 mm215 parts4LBSD-2-Clause26Cheddar
tperale
43 × 26 mm23 parts2LCC-BY-SA-4.010STM32
Cognicity floodsensor
smart-facility
66 × 57 mm57 parts2LGPL-3.04AVR/Arduino
Automata Generator Standard
Sirawit7205
246.4 × 127 mm121 parts2LNo license2Deltavr controller
oxy-2
70 × 70 mm46 parts2LMIT2ESP32
Tubes Mk.
wangga03
100 × 81.5 mm77 parts4LNo license0AVR/Arduino
Revo servo
ratmuds
41 × 44 mm49 parts4LMIT0ESP8266
ESP-Sensors
axello
58.4 × 54 mm17 parts2LNo license1
How designs wire the HT7333
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the HT7333 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_1pin 1 | Connected to: GND 75% · a signal 25% | — |
| VIN_2pin 2 | Connected to: 5V 75% · a signal 25% | — |
| VOUT_3pin 3 | Connected to: 3.3V 63% · a signal 38% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Analog and ad9958 by balmerdx, Cheddar by tperale, Cognicity floodsensor by smart-facility and Deltavr controller by oxy-2.
The HT7333 in open source designs
The gallery holds 8 open source boards using the HT7333 from 8 GitHub repositories; a typical one measures about 68 × 63.5 mm and carries around 53 components.
63% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Analog and ad9958 by balmerdx.
Microcontrollers on boards using the HT7333
What boards using the HT7333 are built for
HT7333: common questions
Where can I find a HT7333 reference design?
Each of the 8 boards on this page is a real design using the HT7333. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the HT7333 use?
Most are built on AVR/Arduino (2), ESP32 (1), ESP8266 (1) and STM32 (1).
How big is a typical board using the HT7333?
The median is 68 × 63.5 mm, and 63% are two-layer designs.
What is the most popular open source board using the HT7333?
By GitHub stars, Analog and ad9958 by balmerdx, with 26 stars.
Can I simulate one of these boards using the HT7333 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.