Splittie
Bananaking23·splittie·modular keyboard pcbs/modular keyboard pcbs.kicad_pcb
About the Splittie PCB
Splittie is an open source RP2040/RP2350 PCB design by Bananaking23, published on GitHub. It is a 2-layer board measuring 103 × 98 mm, with 100 components from 7 distinct parts.
Its main chip is the RP2040_PRO_MICRO, from the RP2040/RP2350 family. By type, the board carries 40 diodes, 38 connectors, 21 switches and 1 IC.
It belongs with the keyboards and displays & leds designs in this gallery.
From the project
I am going to design a board about 18.5x18.5mm in size, it will include leds, kailh switches and diodes, and i am going to create a split keyboard with it.
I made this project because every now and then i get the urge to create a new maccropad/keyboard with this pcb, i can create it in any shape or form and it is MUCH easier to wire then a handwired keyboard. ## Schematic
Main components on the Splittie
Splittie bill of materials (BOM)
100 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040_PRO_MICRO RP2040_Pro_Micro | RP2040_Pro_Micro | U1 |
| 37 | CONN_01X01_PIN Conn_01x01_Pin | PinHeader_1x01_P1.00mm_Vertical | J201, J202, J203, J204, J205, J206, J207, J208 +29 |
| 1 | OLED_128X32 OLED_128x32 | OLED_128x32 | J233 |
| 20 | ~ | Hotswap_MX_1.00u | S6, S106, S206, S306, S406, S506, S606, S706 +12 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 20 | LED_SK6812MINI | LED_SK6812MINI | D11, D111, D211, D311, D411, D511, D611, D711 +12 |
| 20 | ~ | Diode_SOD-123 | D12, D112, D212, D312, D412, D512, D612, D712 +12 |
Splittie design files
The KiCad project lives in the Bananaking23/splittie repository on GitHub; these links point at the commit this page was built from.
Splittie: common questions
What microcontroller does the Splittie use?
The Splittie is built around the RP2040_PRO_MICRO, from the RP2040/RP2350 family.
How big is the Splittie PCB?
The Splittie measures 103 × 98 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Splittie?
100 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Splittie design files?
From the Bananaking23/splittie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Splittie design in my own project?
The repository has no license, so all rights stay with Bananaking23. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Splittie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k