8 open source boards using the RP2040_Pro_Micro

Real designs built with the RP2040_Pro_Micro, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the RP2040_Pro_Micro

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the RP2040_Pro_Micro connects to, and the resistors, capacitors and other passives placed on it.

  • The RST pin is left unconnected on 5 of 7 designs.
RSTpin 28Connected to: Not connected 71%

28 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Barghest by ElKinoflop, Sheaf65 by nxrmqlly, Hallpico by plushugh and Splittie by Bananaking23.

The RP2040_Pro_Micro in open source designs

The gallery holds 8 open source boards using the RP2040_Pro_Micro from 8 GitHub repositories; a typical one measures about 266.7 × 98 mm and carries around 119 components.

100% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is Sheaf65 by nxrmqlly.

Microcontrollers on boards using the RP2040_Pro_Micro

What boards using the RP2040_Pro_Micro are built for

RP2040_Pro_Micro: common questions

Where can I find a RP2040_Pro_Micro reference design?

Each of the 8 boards on this page is a real design using the RP2040_Pro_Micro. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RP2040_Pro_Micro RST pin connected?

The RST pin is left unconnected on 5 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the RP2040_Pro_Micro.

Which microcontrollers do boards using the RP2040_Pro_Micro use?

Most are built on RP2040/RP2350 (8).

How big is a typical board using the RP2040_Pro_Micro?

The median is 266.7 × 98 mm, and 100% are two-layer designs.

What is the most popular open source board using the RP2040_Pro_Micro?

By GitHub stars, Sheaf65 by nxrmqlly, with 6 stars.

Can I simulate one of these boards using the RP2040_Pro_Micro before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part