QO100 TX
barisdinc·N3B_SDR_Transceiver_HW·QO100 TRX KEYBOARD AND DISPLAY INTERFACE/QO100_TX.kicad_pcb
About the QO100 TX PCB
QO100 TX is an open source PCB design by barisdinc, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 97 × 97 mm, with 15 components from 15 distinct parts.
Other key parts include the ILI9341. By type, the board carries 9 switches, 3 connectors, 1 IC, 1 capacitor and 1 resistor.
It belongs with the rf & radio designs in this gallery.
From the project
V/U/SHF and QO-100 SDR Transceiver Project
This project is a SDR receiver transceiver project initiated to have a portable QO-100 Satellite ground station which can receiver on 739 MHz (direct output of a standard TV LNB) and transmit on 2.4 GHz QO-100 uplink frequency. The basic idea of the SDR is based on Arjante Marvelde's implementation of Guido's uSDX implementation on raspberry pi pico (https://github.com/ArjanteMarvelde/uSDR-pico/).

Main components on the QO100 TX
QO100 TX bill of materials (BOM)
15 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ILI9341 | ILI9341_32 | U1 |
| 1 | PATCH01 | PinHeader_1x20_P2.54mm_Vertical | J1 |
| 1 | PATCH02 | PinHeader_1x20_P2.54mm_Vertical | J2 |
| 1 | PJ-102A | Barrel_Jack_5.5mmODx2.1mmID_PJ-102A | J4 |
| 1 | KEY TX1 | SW_PUSH_6mm | SW1 |
| 1 | KEY TX2 | SW_PUSH_6mm | SW2 |
| 1 | KEY TX3 | SW_PUSH_6mm | SW3 |
| 1 | PTT | SW_PUSH_6mm | SW4 |
| 1 | TX Rotary | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW5 |
| 1 | RX Rotary | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW6 |
| 1 | KEY RX1 | SW_PUSH_6mm | SW7 |
| 1 | KEY RX2 | SW_PUSH_6mm | SW8 |
| 1 | KEY RX3 | SW_PUSH_6mm | SW9 |
| 1 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 560R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
QO100 TX design files
The KiCad project lives in the barisdinc/N3B_SDR_Transceiver_HW repository on GitHub; these links point at the commit this page was built from.
QO100 TX: common questions
How big is the QO100 TX PCB?
The QO100 TX measures 97 × 97 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the QO100 TX?
15 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the QO100 TX design files?
From the barisdinc/N3B_SDR_Transceiver_HW repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the QO100 TX design in my own project?
Yes, under the terms of its GPL-3.0 license, which barisdinc chose for the repository.
More boards in N3B_SDR_Transceiver_HW
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568