8 open source boards using the ILI9341

Real designs built with the ILI9341, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the ILI9341

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ILI9341 connects to, and the resistors, capacitors and other passives placed on it.

  • The SD_SCK pin is left unconnected on 5 of 6 designs.
  • The SD_MISO pin is left unconnected on 5 of 6 designs.
  • The SD_MOSI pin is left unconnected on 5 of 6 designs.
  • The SD_CS pin is left unconnected on 5 of 6 designs.
SD_SCKpin 15Connected to: Not connected 83% · a signal 17%
SD_MISOpin 16Connected to: Not connected 83% · a signal 17%
SD_MOSIpin 17Connected to: Not connected 83% · a signal 17%
SD_CSpin 18Connected to: Not connected 83% · a signal 17%

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mega-Cube-Board by MaltWhiskey, OTTO-main by cester-ino, QO100 TX by barisdinc and OTTO-main by cester-ino.

The ILI9341 in open source designs

The gallery holds 8 open source boards using the ILI9341 from 8 GitHub repositories; a typical one measures about 170 × 81 mm and carries around 100 components.

50% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is Mega-Cube-Board by MaltWhiskey.

Parts used alongside the ILI9341

Microcontrollers on boards using the ILI9341

ILI9341: common questions

Where can I find a ILI9341 reference design?

Each of the 8 boards on this page is a real design using the ILI9341. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ILI9341 SD_SCK pin connected?

The SD_SCK pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the ILI9341.

How is the ILI9341 SD_MISO pin connected?

The SD_MISO pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the ILI9341.

How is the ILI9341 SD_MOSI pin connected?

The SD_MOSI pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the ILI9341.

Which microcontrollers do boards using the ILI9341 use?

Most are built on STM32 (3), ESP32 (2), AVR/Arduino (1) and NXP (1).

How big is a typical board using the ILI9341?

The median is 170 × 81 mm, and 50% are two-layer designs.

What is the most popular open source board using the ILI9341?

By GitHub stars, Mega-Cube-Board by MaltWhiskey, with 763 stars.

Can I simulate one of these boards using the ILI9341 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part