STM32-DevBoard
Basile-hltd·STM32-DevBoard·hardware/STM32_DevBoard.kicad_pcb
About the STM32-DevBoard PCB
STM32-DevBoard is an open source STM32 PCB design by Basile-hltd, published on GitHub. It is a 4-layer board measuring 134.6 × 42 mm, with 90 components from 55 distinct parts.
Its main chip is the STM32C071CBTX, from the STM32 family. Other key parts include the DISPLAY TFT, USBLC6-2SC6, AP2112R5-3.3TRG1, SGP40-D-R4 and MS5607-02BA. By type, the board carries 31 resistors, 20 test points, 17 capacitors, 8 ICs, 5 connectors and 5 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Carte de développement autour d'un microcontrôleur STM32, conçue pour l'acquisition de données environnementales, la communication industrielle et l'expansion vers breadboard ou systèmes embarqués tiers.
Carte de développement autour d'un microcontrôleur STM32, conçue pour l'acquisition de données environnementales, la communication industrielle et l'expansion vers breadboard ou systèmes embarqués tiers.
- KiCad 8.x ou supérieur - Bibliothèques KiCad standard - CMake - arm-none-eabi - dfu-util - STM32Cube-Programmer ---
Cela va buils le HAL ainsi que toutes la applications. Le premier build peut prendre plus de temps. Les binaire des applications se trouvent dans software/bin/lenomdelapp/`

Main components on the STM32-DevBoard
STM32-DevBoard bill of materials (BOM)
90 components, 55 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32C071CBTX STM32C071CBTx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | DISPLAY TFT | TFT_SPI | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | AP2112R5-3.3TRG1 | AP2112R5-3.3 | U4 |
| 1 | SGP40-D-R4 | XCDR_SGP40-D-R4 | U5 |
| 1 | MS5607-02BA | MS5607 | U6 |
| 1 | HDC1080 | Texas_PWSON-N6 | U7 |
| 1 | TP8485E-SR | SO-8SOIC-8_TPK | U8 |
| 1 | USB4105-GF-A | GCT_USB4105-GF-A | J1 |
| 1 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_WAGO_236-102_1x02_P5.00mm_45Degree | J2 |
| 1 | RJ45_LED_SHIELDED RJ45_LED_Shielded | RJ45 | J3 |
| 1 | PORT_B_1 Port_B_1 | PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | PORT_B_2 Port_B_2 | PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | PEC12R-4217F-S0012 | XDCR_PEC12R-4217F-S0012 | S1 |
| 1 | SW_BOOT | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 1 | SW_MEC_5G SW_RESET | SW_PUSH_6mm | SW2 |
| 6 | GND | TestPoint_Loop_D2.50mm_Drill1.0mm | TP1, TP7, TP8, TP13, TP14, TP18 |
| 1 | SDA | TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |
| 1 | SCL | TestPoint_Loop_D2.50mm_Drill1.0mm | TP3 |
| 1 | BOOT0 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP4 |
Show 35 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | VREF+ | TestPoint_Loop_D2.50mm_Drill1.0mm | TP5 |
| 1 | NRST | TestPoint_Loop_D2.50mm_Drill1.0mm | TP6 |
| 1 | D+ | TestPoint_Loop_D2.50mm_Drill1.0mm | TP9 |
| 1 | D- | TestPoint_Loop_D2.50mm_Drill1.0mm | TP10 |
| 1 | VBUS | TestPoint_Loop_D2.50mm_Drill1.0mm | TP11 |
| 1 | 3V3 3v3 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP12 |
| 1 | USART1_DE | TestPoint_Loop_D2.50mm_Drill1.0mm | TP15 |
| 1 | USART1_RX | TestPoint_Loop_D2.50mm_Drill1.0mm | TP16 |
| 1 | USART1_TX | TestPoint_Loop_D2.50mm_Drill1.0mm | TP17 |
| 1 | RS_458_B | TestPoint_Loop_D2.50mm_Drill1.0mm | TP19 |
| 1 | RS_458_A | TestPoint_Loop_D2.50mm_Drill1.0mm | TP20 |
| 1 | IN-S66TBTRGB | IN-S66TB_INL | LED1 |
| 1 | BOOT0_LED | LED_0805_2012Metric | D1 |
| 2 | CC | D_SOD-323 | D2, D3 |
| 1 | VBUS_LED | LED_0805_2012Metric | D4 |
| 1 | 3V3_LED 3v3_LED | LED_0805_2012Metric | D5 |
| 9 | 100NF 100nF | C_0805_2012Metric | C1, C2, C3, C5, C6, C10, C12, C13 +1 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric | C4 |
| 1 | 10UF 10uF | C_0805_2012Metric | C7 |
| 3 | 1UF 1uF | C_0805_2012Metric | C8, C9, C11 |
| 3 | 10NF 10nF | C_0805_2012Metric | C15, C16, C17 |
| 1 | 150 | R_0805_2012Metric | R1 |
| 2 | 3K3 3k3 | R_0805_2012Metric | R2, R3 |
| 7 | 10K 10k | R_0805_2012Metric | R4, R22, R23, R24, R25, R26, R27 |
| 2 | 0 | R_0805_2012Metric | R5, R16 |
| 2 | 560 | R_0805_2012Metric | R6, R28 |
| 2 | 360 | R_0805_2012Metric | R7, R8 |
| 2 | 1M | R_0805_2012Metric | R9, R18 |
| 2 | 5K1 5k1 | R_0805_2012Metric | R10, R11 |
| 2 | 100 | R_0805_2012Metric | R12, R13 |
| 2 | 22 | R_0805_2012Metric | R14, R15 |
| 1 | 4.7 | R_0805_2012Metric | R17 |
| 1 | 120 | R_0805_2012Metric | R19 |
| 4 | 1k | R_0805_2012Metric | R20, R21, R30, R32 |
| 1 | 220 | R_0805_2012Metric | R29 |
STM32-DevBoard design files
The KiCad project lives in the Basile-hltd/STM32-DevBoard repository on GitHub; these links point at the commit this page was built from.
STM32-DevBoard: common questions
What microcontroller does the STM32-DevBoard use?
The STM32-DevBoard is built around the STM32C071CBTX, from the STM32 family.
How big is the STM32-DevBoard PCB?
The STM32-DevBoard measures 134.6 × 42 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the STM32-DevBoard?
90 components, from 55 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM32-DevBoard design files?
From the Basile-hltd/STM32-DevBoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STM32-DevBoard design in my own project?
The repository has no license, so all rights stay with Basile-hltd. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32-DevBoard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k