OverdrivePedal
basimallawala·OverdrivePedal
About the OverdrivePedal PCB
OverdrivePedal is an open source PCB design by basimallawala, published on GitHub under the MIT license. It is a 4-layer board measuring 117.8 × 152.4 mm, with 27 components from 16 distinct parts.
Other key parts include the TL072. By type, the board carries 11 resistors, 8 capacitors, 3 connectors, 3 diodes, 1 IC and 1 switch.
It belongs with the audio designs in this gallery.
From the project
Overdrive guitar pedal, made entirely custom in KiCad and Fusion360.
A through-hole guitar overdrive pedal designed in KiCad. Op-amp gain stage with diode soft-clipping, a tone control, a volume control, true-bypass switching with an indicator LED, and battery or DC power. Everything (pots, jacks, LED) mounts directly to the PCB, so the board sits behind the enclosure face with nothing but the footswitch wired by hand.
- Non-inverting TL072 gain stage with symmetric 1N4148 clipping - Gain, Tone and Volume controls - True bypass via a 3PDT footswitch, with an LED that lights only when the effect is engaged - Powered by a 9V battery or a DC jack (the switched…
Main components on the OverdrivePedal
OverdrivePedal bill of materials (BOM)
27 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072 | DIP-8_W7.62mm | U1 |
| 1 | 54-00130 | TENSILITY_54-00130 | J1 |
| 2 | NMJ6HFD2 | NEUTRIK_NMJ6HFD2 | J4, J5 |
| 1 | ~ | PinSocket_1x09_P2.54mm_Vertical | SW1 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | LED | LED_D5.0mm | D3 |
| 2 | 22nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C4 |
| 2 | 47uF | CP_Radial_D5.0mm_P2.00mm | C2, C3 |
| 1 | 220nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 100p | C_Disc_D5.0mm_W2.5mm_P5.00mm | C6 |
| 2 | 0.1u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C7, C8 |
| 1 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 3 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R6 |
| 3 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R7, R8 |
| 3 | PTV09A-4025F-B103 | PTV09A-4025F-B103 | R9, R10, R12 |
OverdrivePedal design files
The KiCad project lives in the basimallawala/OverdrivePedal repository on GitHub; these links point at the commit this page was built from.
- LayoutOverdrivePedal.kicad_pcb
- SchematicOverdrivePedal.kicad_sch
- BOMREADME.md
OverdrivePedal: common questions
How big is the OverdrivePedal PCB?
The OverdrivePedal measures 117.8 × 152.4 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the OverdrivePedal?
27 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OverdrivePedal design files?
From the basimallawala/OverdrivePedal repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OverdrivePedal design in my own project?
Yes, under the terms of its MIT license, which basimallawala chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687