Port sprite
Batterhead221·port_sprite·ECAD/PORT_SPRITE.kicad_pcb
About the Port sprite PCB
Port sprite is an open source PCB design by Batterhead221, published on GitHub. It is a 4-layer board measuring 51.6 × 37.8 mm, with 34 components from 28 distinct parts.
Other key parts include the TPD2EUSB30, AP2112K-3.3 and CP2102N-Axx-xQFN20. By type, the board carries 8 test points, 8 resistors, 6 capacitors, 3 ICs, 3 switches and 3 diodes.
It belongs with the usb & debug tools designs in this gallery.
From the project
Compact USB-C to UART debug/programming interface for embedded hardware projects.
Compact USB-C to UART debug/programming interface for embedded hardware projects.
PORT_SPRITE is a reusable bench tool for custom PCB bring-up. It provides USB-C serial access, 3.3V UART logic, selectable target power output, activity LEDs, reset/boot controls, and labeled test points so new boards can be programmed, tested, and debugged without rebuilding the same support circuit every time.

Main components on the Port sprite
Port sprite bill of materials (BOM)
34 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPD2EUSB30 | Texas_DRT-3 | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | CP2102N-Axx-xQFN20 | WFQFN-20 | U3 |
| 1 | UART_TARGET_HEADER | PinHeader_1x08_P2.54mm_Horizontal | J1 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4085 | J2 |
| 1 | 500mA | Fuse_1206_3216Metric | F1 |
| 1 | BOOT_LOW_BTN | SW_SPST_Omron_B3FS-100xP | SW1 |
| 1 | RESET_BTN | SW_SPST_Omron_B3FS-100xP | SW2 |
| 1 | SLIDE_SWITCH | SW_SPDT_CK_JS102011SAQN | SW3 |
| 1 | VOUT | TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP1 |
| 1 | RTS | TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP2 |
| 1 | CTS | TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP3 |
| 1 | TXD | TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP4 |
| 1 | RXD | TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP5 |
| 1 | +3V3 | TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP6 |
| 1 | +5V | TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP7 |
| 1 | GND | TestPoint_Bridge_Pitch2.0mm_Drill0.7mm | TP8 |
| 1 | PWR (RED) | LED_0603_1608Metric | D1 |
| 1 | RX (BLUE) | LED_0603_1608Metric | D2 |
| 1 | TX (YELLOW) | LED_0603_1608Metric | D3 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10U | C_0805_2012Metric | C1, C4 |
| 3 | 100NF | C_0603_1608Metric | C2, C3, C6 |
| 1 | 1U | C_0603_1608Metric | C5 |
| 2 | 5.1K | R_0603 | R1, R2 |
| 1 | 22.1K | R_0603 | R3 |
| 1 | 47.5K | R_0603 | R4 |
| 3 | 1K | R_0603 | R5, R7, R8 |
| 1 | 10K | R_0603 | R6 |
Port sprite design files
The KiCad project lives in the Batterhead221/port_sprite repository on GitHub; these links point at the commit this page was built from.
- LayoutECAD/PORT_SPRITE.kicad_pcb
- SchematicECAD/PORT_SPRITE.kicad_sch
Port sprite: common questions
How big is the Port sprite PCB?
The Port sprite measures 51.6 × 37.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Port sprite?
34 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Port sprite design files?
From the Batterhead221/port_sprite repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Port sprite design in my own project?
The repository has no license, so all rights stay with Batterhead221. Use it as a reference, and ask the author before reusing the design.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389