Esp32-rotary exchange
bbowman410·esp32-rotary-exchange·hardware/esp32-phone-exchange/esp32-phone-exchange.kicad_pcb
About the Esp32-rotary exchange PCB
Esp32-rotary exchange is an open source ESP32 PCB design by bbowman410, published on GitHub. It is a 2-layer board measuring 103 × 70 mm, with 22 components from 12 distinct parts.
Its main chip is the ESP32-DevKit, from the ESP32 family. Other key parts include the AG1170 and PCM1808 Dev Board. By type, the board carries 8 resistors, 6 capacitors, 3 ICs, 3 transistors and 2 connectors.
It belongs with the iot & wireless, retro computing and audio designs in this gallery.
From the project
A Wi-Fi-enabled telephone exchange powered by ESP32 for connecting and ringing vintage rotary phones.
A small private telephone exchange for vintage rotary phones that supports Wifi. Each phone on the network requires one module consisting of: an ESP32, a Silvertel AG1170 subscriber-line circuit, and a PCM1808 analog-to-digital converter. The nodes find each other over Wi-Fi and place three-digit calls. A computer can join the same network as a softphone for testing and troubleshooting.

Main components on the Esp32-rotary exchange
Esp32-rotary exchange bill of materials (BOM)
22 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DevKit | ESP32-C3-DevKitM-1 | U1 |
| 1 | AG1170 | AG1170 | U2 |
| 1 | PCM1808 Dev Board | PCM1808-dev-board | U3 |
| 3 | Q_NPN_EBC | TO-92 | Q3, Q4, Q5 |
| 1 | RJ11 | RJ14_Connfly_DS1133-S4_Horizontal | J1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J2 |
| 4 | 100nF | C_Disc_D10.0mm_W2.5mm_P5.00mm | C1, C4, C5, C6 |
| 1 | 100uF 6.3V | CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 220uF 10V | CP_Radial_D10.0mm_P5.00mm | C3 |
| 4 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4, R5, R6 |
| 3 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R8 |
| 1 | 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
Esp32-rotary exchange design files
The KiCad project lives in the bbowman410/esp32-rotary-exchange repository on GitHub; these links point at the commit this page was built from.
Esp32-rotary exchange: common questions
What microcontroller does the Esp32-rotary exchange use?
The Esp32-rotary exchange is built around the ESP32-DevKit, from the ESP32 family.
How big is the Esp32-rotary exchange PCB?
The Esp32-rotary exchange measures 103 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32-rotary exchange?
22 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32-rotary exchange design files?
From the bbowman410/esp32-rotary-exchange repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32-rotary exchange design in my own project?
The repository has no license, so all rights stay with bbowman410. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32-rotary exchange without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k