Bio power2
bcbergmanuu·Bio-power2
About the Bio power2 PCB
Bio power2 is an open source PCB design by bcbergmanuu, published on GitHub. It is a 4-layer board measuring 32.5 × 24 mm, with 25 components from 16 distinct parts.
Other key parts include the STUSB4500QTR and LT3041ADE-PBF. By type, the board carries 10 capacitors, 7 resistors, 3 connectors, 2 ICs, 1 diode and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
power adaptor biosemi
LDO: lt3041 1. High PSRR as to reduce powerpack boost converter noise 2. Low dropout to extend powerpack life (current 310mv) 3. Low RMS noise 4. 1A output capability 5. DC 6.2 volt
Power Delivery: stusb4500 1. Power delivery 3 capability to reduce power consumption. 2. PD2 will be set to 9 volt, loss ~50% 3. PD3 will be set to 6.6v volt, loss <10%.

Main components on the Bio power2
Bio power2 bill of materials (BOM)
25 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STUSB4500QTR | QFN-24-1EP_4x4mm_P0.5mm_EP2.15x2.15mm_ThermalVias | U1 |
| 1 | LT3041ADE-PBF | 05-08-1708_ADI | U3 |
| 1 | TYPE-C-31-M-12 | HRO_TYPE-C-31-M-12 | J1 |
| 1 | 6vdc | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | TC2030-IDC | Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J3 |
| 1 | ESDA25W | SOT323-3L_STM | CR1 |
| 1 | D_Schottky | D_SOD-323 | D1 |
| 1 | YI321611U151-4R5T | L_1206_3216Metric | FB1 |
| 4 | 1u | C_0402_1005Metric | C1, C2, C3, C7 |
| 6 | 10u | C_0603_1608Metric | C4, C5, C6, C8, C9, C11 |
| 1 | 100k | R_0805_2012Metric | R1 |
| 2 | 1k | R_0805_2012Metric | R3, R7 |
| 1 | 470 | R_0805_2012Metric | R4 |
| 1 | 1M | R_0805_2012Metric | R9 |
| 1 | 51k | R_0805_2012Metric | R10 |
| 1 | 62k | R_0805_2012Metric | R11 |
Bio power2 design files
The KiCad project lives in the bcbergmanuu/Bio-power2 repository on GitHub; these links point at the commit this page was built from.
- Layoutbio-power-2.kicad_pcb
- Schematicbio-power-2.kicad_sch
Bio power2: common questions
How big is the Bio power2 PCB?
The Bio power2 measures 32.5 × 24 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Bio power2?
25 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bio power2 design files?
From the bcbergmanuu/Bio-power2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bio power2 design in my own project?
The repository has no license, so all rights stay with bcbergmanuu. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k