61 open source boards using the STUSB4500QTR

Real designs built with the STUSB4500QTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

61 boardsClear filters|Most starred

How designs wire the STUSB4500QTR

Read from the KiCad layouts of 45 open source designs, one per repository: what each pin of the STUSB4500QTR connects to, and the resistors, capacitors and other passives placed on it.

  • The VREG_1V2 pin has a capacitor to GND on 40 of 44 designs, most often 1 µF (then 10 µF).
  • The VREG_2V7 pin has a capacitor to GND on 36 of 44 designs, most often 1 µF (then 10 µF).
  • The VDD pin has a decoupling capacitor on 34 of 44 designs, most often 1 µF (then 100 nF).
  • The A_B_SIDE pin is left unconnected on 40 of 44 designs (a signal on 4).
NCpin 3Connected to: Not connected 89%
RESETpin 6Connected to: Signal 59% · GND 34%
  • Resistor to GND on 52% · 100 kΩ (10), 10 kΩ (9), 2.37 kΩ (2)
SCLpin 7Connected to: A connector 48%, the microcontroller 36%
  • Pull-up to 3.3V on 61% · 4.7 kΩ (13), 10 kΩ (5), 2.2 kΩ (5)
SDApin 8Connected to: A connector 48%, the microcontroller 36%
  • Pull-up to 3.3V on 61% · 4.7 kΩ (13), 10 kΩ (5), 2.2 kΩ (5)
DISCHpin 9Connected to: Signal 75% · not connected 20%
  • Series resistor on 39% · 1 kΩ (15), 100 kΩ (1)
  • Pull-up to VBUS on 36% · 1 kΩ (11), 1.5 kΩ (2), 470 Ω (2)
GNDpin 10, 25Connected to: GND 95%
ATTACHpin 11Connected to: Not connected 82% · a signal 16%
ADDR0pin 12Connected to: GND 73% · a signal 18%
ADDR1pin 13Connected to: GND 75% · a signal 18%
POWER_OK3pin 14Connected to: Not connected 70% · a signal 27%
GPIOpin 15Connected to: Not connected 82% · a signal 16%
VBUS_EN_SNKpin 16Connected to: Signal 57% · VBUS_EN_SNK 30%
  • Series resistor on 50% · 22 kΩ (14), 10 kΩ (2), 15 kΩ (1)
A_B_SIDEpin 17Connected to: Not connected 91%
VBUS_VS_DISCHpin 18Connected to: Signal 64% · VBUS_VS_DISCH 34%
  • Pull-up to VBUS on 36% · 1 kΩ (9), 1.5 kΩ (2), 2.37 kΩ (2)
ALERTpin 19Connected to: The microcontroller 25% · not connected 43%
  • Pull-up to 3.3V on 32% · 4.7 kΩ (5), 10 kΩ (4), 2.37 kΩ (2)
POWER_OK2pin 20Connected to: Not connected 64% · a signal 36%
VREG_1V2pin 21Connected to: Signal 82% · 1.2V 16%
  • Capacitor to GND on 91% · 1 µF (39), 10 µF (1)
VSYSpin 22Connected to: GND 70% · 3.3V 23%
VREG_2V7pin 23Connected to: Signal 70% · 2.7V 30%
  • Capacitor to GND on 82% · 1 µF (35), 10 µF (1)
VDDpin 24Connected to: VBUS 57% · a signal 41%
  • Decoupling capacitor on 77% · 1 µF (25), 100 nF (8), 10 µF (5)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AxxSolder by AxxAxx, Otter-Iron by Jana-Marie, OtterIron Devkit by Jana-Marie and Ovc3 by osrf.

The STUSB4500QTR in open source designs

The gallery holds 61 open source boards using the STUSB4500QTR from 48 GitHub repositories; a typical one measures about 85 × 65 mm and carries around 90 components.

60% use four copper layers or more, and 38% carry an open source license.

The most starred is AxxSolder by AxxAxx.

Microcontrollers on boards using the STUSB4500QTR

STUSB4500QTR: common questions

Where can I find a STUSB4500QTR reference design?

Each of the 61 boards on this page is a real design using the STUSB4500QTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the STUSB4500QTR VREG_1V2 pin connected?

The VREG_1V2 pin has a capacitor to GND on 40 of 44 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 45 open source designs using the STUSB4500QTR.

How is the STUSB4500QTR VREG_2V7 pin connected?

The VREG_2V7 pin has a capacitor to GND on 36 of 44 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 45 open source designs using the STUSB4500QTR.

What decoupling capacitors do designs use on the STUSB4500QTR VDD pin?

The VDD pin has a decoupling capacitor on 34 of 44 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 45 open source designs using the STUSB4500QTR.

What parts are used alongside the STUSB4500QTR?

The USBLC6-2SC6, AP2112K-3.3TRG1, ESP32-S3-WROOM-1-N8R8, AP63203WU-7 and BQ25792RQMR appear in the most repositories here.

Which microcontrollers do boards using the STUSB4500QTR use?

Most are built on ESP32 (14), STM32 (13) and RP2040/RP2350 (6).

How big is a typical board using the STUSB4500QTR?

The median is 85 × 65 mm, and 40% are two-layer designs.

What is the most popular open source board using the STUSB4500QTR?

By GitHub stars, AxxSolder by AxxAxx, with 1,714 stars.

Can I simulate one of these boards using the STUSB4500QTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part